Reply With Quote
so continuing along, this work was all done before my VIC 4WD show trip and worked well:
I used a Hippo liner kit (about $100) and rollered it onto the flat surfaces after flattening off the paint
Painted this panel off the car and Sikaflexed all the edges before screwing it all down and cleaned up any overfill:
Then using the same Form Shield I started cutting out to cover all the remaining panels, putting the Ali side to the heat sources:
Put the original carpet back over the Form Shield - again using Contact adhesive on both sides:
Cut some Form Shield the same side as the original rubber mat and put it under the mat:
Form Shield cut out for the rear cargo area:
Original mat went back in over the top:
Cut out some Form Shield to cover the seat boxes:
Fitted all the trim panels back in:
I have a false floor in place of the rear seats - this also got a coat of Hippo liner:
Bored yet?
LRH
Just how I like it.
Originally Posted by LRHybrid100
) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
Bookmarks