Results 1 to 6 of 6

Thread: TD5 auto gear change switch

  1. 5th February 2008, 07:06 PM #1
    greg smith
    greg smith is offline Master
    Join Date
    Sep 2007
    Location
    Malanda FNQ
    Posts
    328
    Total Downloaded
    0

    TD5 auto gear change switch

    Tried to remove old switch . The nuts and bolts; easy, HOW do you undo the wiring clip???
    Reply With Quote Reply With Quote
  2. 5th February 2008, 07:15 PM #2
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    which wiring clip ????

    Pics ???
    Reply With Quote Reply With Quote
  3. 5th February 2008, 08:05 PM #3
    greg smith
    greg smith is offline Master
    Join Date
    Sep 2007
    Location
    Malanda FNQ
    Posts
    328
    Total Downloaded
    0

    TD5 auto change switch

    No pics, not that advanced. Switch is located on side of trans, above cat converter [on exhaust] 2small 10mm bolts, 1 13mm nut on switch lever, wiring from switch to connector mounted on side of trans which connects to wiring loom.
    Reply With Quote Reply With Quote
  4. 5th February 2008, 08:15 PM #4
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    Greg, why are you replacing the switch?
    what were the symptoms?

    Lots of us on here with a ZF 4HP22-24,,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  5. 5th February 2008, 08:18 PM #5
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    Right, just about with you.

    The connector 'clips' into the bracket, a bit like a microphone clip, you know where you have the CB/UHF mic that has a clip, and to get it out it clips out forward or backwards - but normally it's hard, and means exchanging knuckle flesh and blood on the casing of the box.

    Band aids and swear box at the ready
    Reply With Quote Reply With Quote
  6. 7th February 2008, 03:32 PM #6
    greg smith
    greg smith is offline Master
    Join Date
    Sep 2007
    Location
    Malanda FNQ
    Posts
    328
    Total Downloaded
    0
    Replacing switch : when selecting gear after starting the two green warning lights would flash[selecting 3rd]. This requiring shutting down and then selecting N and restarting hopefully all reset. Checked with local LR mechanic recomended switc replacement
    Reply With Quote Reply With Quote
« Water level warning sesnor | 2,25 Spark Plug Choice »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!