Thread: County fuel tank leaking

Originally Posted by mark2

The fuel tank on my 110 is leaking - I think its rusted on the base between the stone guard and the tank.

What are my options? Will a tank from a RR fit? Has anyone successfully removed the stone guard from underneath and done a successful repair?

Yes i have repaired one...
pull it out, clean off the rust and get the best quality 2 part epoxy that is fuel resistant.

Clarkie

Originally Posted by mark2

The fuel tank on my 110 is leaking - I think its rusted on the base between the stone guard and the tank.

What are my options? Will a tank from a RR fit? Has anyone successfully removed the stone guard from underneath and done a successful repair?

The stone guard can be removed by carefully drilling out the spot welds. I gave up trying to repair mine when I found the baffles had broken off and were floating around loose (so that was what that noise was!).

John

Thanks - I will have a go at removing the base. Would rewelding the spot welds be safe, given that I would welding to the tank flanges and the tank body itself?
Clarkie, I seem to recall that you posted a thread on your tank repair somewhere here - do you have a link to it? ( I cant find it)

I'm told a Rangie one will fit as well, make sure you get a placky one as the earlier steel one suffer the same fate.
David

I used some of this stuff;

PPC - Tank Repair Kits

Just last week. Cost $114. Have only just filled the tank up tonight. No leaks so far. If it begins to leak I will let you know....

Originally Posted by mark2

Thanks - I will have a go at removing the base. Would rewelding the spot welds be safe, given that I would welding to the tank flanges and the tank body itself?
......

I would not consider welding it - rivets or bolts coould be used, but on mine the mounting bolts hold it in place anyway (my new tank came without the stone shield so I used the old one).

John

Originally Posted by the_grubb

I used some of this stuff;

PPC - Tank Repair Kits

Just last week. Cost $114. Have only just filled the tank up tonight. No leaks so far. If it begins to leak I will let you know....

X2 POR 15 is good stuff

Originally Posted by rovercare

X2 POR 15 is good stuff

Yes it is, spot on there Matt....

As for drilling the spots, just drill the tank bash plate and not all the thru, then use a cold chisle to seperate them... takes a while....

Link to my post.....
http://www.aulro.com/afvb/technical-...-into-you.html