Results 1 to 2 of 2

Thread: Disco 2 Gas Injection Setup

  1. #1
    Join Date
    Feb 2007
    Posts
    4
    Total Downloaded
    0

    Disco 2 Gas Injection Setup

    Hi Everyone,

    I have recently picked up a Petrol 2000 Discovery and I am looking to convert it to gas.

    I have spoken with Robert Hughes in Canberra and they have suggested:

    - ELKO gas injection kit
    - 65l (usable) APA manifold gas tank in the rear load space (loss of 25cm)

    Does anyone have any experience/knowledge surrounding this setup. The ELKO computer does not retain the tuning settings if the battery is disconnected, although I am not too concerned about this due to having a dual battery setup.

    I would prefer the tanks to be mounted under the body if anyone has any ideas here. My vehicle has coils all round and no ACE so there may be space but a loss of ground clearance?

    Further advice regarding recomended fitters in the Canberra area would also be appreciated.

    Thanks in advance,

    Duncan.

    --------------------
    2000 Discovery
    1950 Series 1
    1957 Series 1

  2. #2
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,711
    Total Downloaded
    1.63 MB
    Can't help on Elko, mine has a KME sequential vapour injection system. No loss of power on change to LPG - I can't detect any difference at all.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!