Havent played with ford V8's much to be honest. I would like to build and EB xr8 sprint with two t28's.....:twisted: I NEED to build a forced induction V8:angel:
Printable View
Havent played with ford V8's much to be honest. I would like to build and EB xr8 sprint with two t28's.....:twisted: I NEED to build a forced induction V8:angel:
Pssst you mean ED;)
I had an ED XR8 sprint....sold it after a sprint from the law, and decided to give up road cars for a while:angel:
Shame, I wanted one for years to:(, the only car I kept for myself, I hadn't built:eek:
Umm one of my mates used to own an EB xr8 sprint......defiantly an XR8 and definatly an EB........its possible the sprint badges where take on tho
Mock:(Quote:
Originally Posted by Lucus
Possibly, still a nice car tho......:p
Mock or its an ED:pQuote:
Originally Posted by Lucus
I know my 90's fords and it was definatly an eb, mock sprint/xr8 maybe but definatly a factory fitted 5.0 mustang windsor. I had the heads off due to coolant leaking into the sump and it had cast heads and roller lifters. Also had and svo cam but im 99% sure this was fitted aftermarket.
It had a set of headers and a 3" exhaust and ran 13.7/13.8 1/4's all day long.
do bad it burned down do a dodgy stereo install.
Then you'd know there was no EB sprints:DQuote:
Originally Posted by Lucus
If they put a roller cam in, they'd of had to fit roller lifters, so no suprise there, E7 heads?
What plenum, intake, GT40?, would have had a grey cover also, with a dirty bolt through the middle of it, not quite as neat of a fit as a normal EFI windsor:mad:
A couple of pic of the difference between a 14 year old Lucus injector and a 3 year old bosch injector. No prizes for guessing why there easier to tune with. The also run a higher impedance which takes load off the injectors drivers in the ECU and allows finer control
Luke.
Have done a similar thing on my TVR (Rover V8).. execpt used Megasquirt/EDIS-8. I too have noticed the std Lucas Green injectors seem to give varying AFR..
If I go an auto shop and ask for " bosch 4 orifice dual pattern injectors (ala ba ford 6cyl)".. will they know what I mean. I understood bosch injectors were colour coded..and Reds provide the same cc/min as the Lucas Greens (240cc/min).
Is there a bosch part number?
thanks