Results 1 to 3 of 3

Thread: Sticks for 3/4 canvas

  1. 30th July 2008, 12:15 PM #1
    disco2hse's Avatar
    disco2hse
    disco2hse is offline ChatterBox Subscriber
    Join Date
    Jul 2007
    Location
    Auckland, NZ
    Posts
    2,278
    Total Downloaded
    0

    Sticks for 3/4 canvas

    I have put a new 3/4 canvas onto George (Stage 1, V8, 109). Can someone tell me distance between the holes for the front sticks please? Part number 330897.

    These are shorter than the rear sticks, part number 330896.

    Thanks
    Alan
    Alan
    2005 Disco 2 HSE
    1983 Series III Stage 1 V8
    Reply With Quote Reply With Quote
  2. 30th July 2008, 02:57 PM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,512
    Total Downloaded
    0
    I make it 810mm. You can check it by measuring the distance between the base of the hood bows, or if they are not installed, from the centre of the front socket to the mid point between the mounting holes for the middle bow. (The reason for measuring at the base is to avoid error due to the hood bows leaning or being bent)

    Hope this helps,

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 30th July 2008, 03:08 PM #3
    disco2hse's Avatar
    disco2hse
    disco2hse is offline ChatterBox Subscriber
    Join Date
    Jul 2007
    Location
    Auckland, NZ
    Posts
    2,278
    Total Downloaded
    0
    Thanks John. I didn't think of that
    Alan
    2005 Disco 2 HSE
    1983 Series III Stage 1 V8
    Reply With Quote Reply With Quote
« Sagging front springs RRC | chamging head lights from 99 disco to 03+ model »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!