Lowering brake lines?

Quote:

---

Originally Posted by discowhite

or you can make up a solid line extention like i have. the rear of a D1/defender is as easy as extending the ''t'' piece bracket like slunnie has done.

https://www.aulro.com/afvb/images/im...008/10/236.jpg
dont worrie their not illegal:p and the zip ties arnt there anymore, there is a new bulkhead fitting bolted back to the OE bracket.

i did have some spares lying around but i cant find them...

cheers phil

oh and i think you can buy these from LRA.

---

Thanks discowhite:thumbsup:
I think i will alter the mount like Slunnie did and see how i go from there;)

CHEERS TIM.

Quote:

---

Originally Posted by long stroke

How much are the extended ones, any idea?

CHEERS TIM.

---

I got a full set from Paddock Spares, four inch longer for about $110 delivered to TAS. Might be a tad more now with the dollar not so good.

Pete

Quote:

---

Originally Posted by discopete

I got a full set from Paddock Spares, four inch longer for about $110 delivered to TAS. Might be a tad more now with the dollar not so good.

Pete

---

Thats not to bad, but as you said it would cost just a little bit more now:(

Quote:

---

Originally Posted by discopete

I got a full set from Paddock Spares, four inch longer for about $110 delivered to TAS. Might be a tad more now with the dollar not so good.

Pete

---

I had a quote two weeks ago from Paddocks for their 4in extend braided hoses. The 3 hose version for non ABS Discovery.

25 pounds for the hoses
35 pounds for delivery

About AU$133 in todays money. I was quoted about AU$100 per hose locally made.

Quote:

---

Originally Posted by discowhite

or you can make up a solid line extention like i have. the rear of a D1/defender is as easy as extending the ''t'' piece bracket like slunnie has done.

http://inlinethumb34.webshots.com/44...600x600Q85.jpg
dont worrie their not illegal:p and the zip ties arnt there anymore, there is a new bulkhead fitting bolted back to the OE bracket.

i did have some spares lying around but i cant find them...

cheers phil

oh and i think you can buy these from LRA.

---

How much did it cost ya to extend them if you don't mind me asking?

CHEERS TIM.

Quote:

---

Originally Posted by long stroke

How much are the extended ones, any idea?

CHEERS TIM.

---

I pay around 120 beer tickets to get Enzed to make me ADR approved, braided lines 6" longer than standard, that's for 4, for the front, you have2 front and 1 rear to replace on the disco, so aim for close to that;)

Thats not to bad at all, looks like the way to go!!

CHEERS TIM.

Quote:

---

Originally Posted by rovercare

I pay around 120 beer tickets to get Enzed to make me ADR approved, braided lines 6" longer than standard, that's for 4, for the front, you have2 front and 1 rear to replace on the disco, so aim for close to that;)

---

That is a good price for aussie made. Though my 92 disco has 4 front lines and 1 rear.

Pete

cost me about 11 bucks for the nuts!
i had the bundy tube lying around, the bubble flaring tool and the double flaring tool were already in the tool box.:D

cheers phil

Quote:

---

Originally Posted by discowhite

cost me about 11 bucks for the nuts!
i had the bundy tube lying around, the bubble flaring tool and the double flaring tool were already in the tool box.:D

cheers phil

---

I wouldn;t leave the end of the solid line dangleing without a bracket, one stick and:(, but that's me:D