Disco1, Disco2, defender, P38 interchangable parts.

that's a really helpful post andrew, thankyou

I could add that D1 front seats pre about 95 are different from later D1 seats

Quote:

---

Originally Posted by 87County

that's a really helpful post andrew, thankyou

I could add that D1 front seats pre about 95 are different from later D1 seats

---

I always thought it was early 96 (the vin number is in rave i think) but there are lots of differences. The seatbelts, the seatbelt plugs, the window regs (early are same as rangie i believe, the later fronts are shared with D2s). The rear view mirrors are different, aerials are in the back window on post 96, SRS airbag sensors.....

Andy

Thanks heaps for this post I have been looking for this sort of information for a while now, its great to have when looking at replacement parts:) With the indicator/wiper/horn assembly being interchangable between D1 and D2 I was wondering if this would be the same for my 93 discovery even though the D2 one looks completely different from the one in my disco at the moment?
Thanks Baza

Quote:

---

Originally Posted by DiscoBaz

Thanks heaps for this post I have been looking for this sort of information for a while now, its great to have when looking at replacement parts:) With the indicator/wiper/horn assembly being interchangable between D1 and D2 I was wondering if this would be the same for my 93 discovery even though the D2 one looks completely different from the one in my disco at the moment?
Thanks Baza

---

The LA discos light/indicator switches are interchangable with some rangie classics, but i have never wrecked any, so i dont know which year classics. Mabe someone else can fill in the gaps with the classics and the discos.

Andy

Classics, what about Rangie Classics???????????:(:(:(:(:(:(

Quote:

---

Originally Posted by LOVEMYRANGIE

Classics, what about Rangie Classics???????????:(:(:(:(:(:(

---

Like i have said, i have never owned a classic, so i cannot confirm 100% when and where the parts fit. Ma discos, D2s and P38s only came out for about 5 years each, so its fairly easy to say what changed with what , and when. Classics ran for 25 years! where would i start?

If a soft dash and/or a very clean low km classic turned up at the right price, i will be adding to the list, but dont count on it as i like p38s too much now.


Andy

Quote:

---

Originally Posted by andrew e

Like i have said, i have never owned a classic, so i cannot confirm 100% when and where the parts fit. Ma discos, D2s and P38s only came out for about 5 years each, so its fairly easy to say what changed with what , and when. Classics ran for 25 years! where would i start?

If a soft dash and/or a very clean low km classic turned up at the right price, i will be adding to the list, but dont count on it as i like p38s too much now.


Andy

---

Never owned a Classic??? Does your life feel empty and unrewarding??? :D:D

hi just checking if disco d1 rims will fit d2 hubs looked at the size and d1's have 225x75x16 and the standard d2 size is 235x75x16 so i guess that should be fine.

love any help!!!!


thanks ben:)

Quote:

---

Originally Posted by disco spargs

hi just checking if disco d1 rims will fit d2 hubs looked at the size and d1's have 225x75x16 and the standard d2 size is 235x75x16 so i guess that should be fine.

love any help!!!!


thanks ben:)

---

The stud pattern is different so they won't interchange.

Just for some extra info, the D2 stud is 14mm and the stud pattern of 120PCD is the same as;

P38a

Disco 3 & 4

RRS

09/10 Holden Commodore

Earlier model Commodores have 12mm studs but the same PCD.

Also and can't be 100% on this, the 120PCD is on these as well

BMW X3 & X5

VW Toureg & late model Transporters

Baz.