Bearing play?

i think with ball roller bearings it is impossible to remove all play.

Thanks

Not only the tensioner bearing will cause squawk. The tensioner itself, if worn, will contribute to premature bearing failure(s) by changing belt alignment.

Check that the tensioner is serviceable. Telltale signs are the splitting of the rubber insertion, misalignment of the fixed and moving parts.

HTH

Pete

These bearings are a C3 spec which means they have a bit more clearance (read play) than normal bearings.:)

thanks guys
ill have to have a better look at the tensioner assembly
sounds like its normal tho :eek: