Thread: HELP !! RR Classic 1991 Passenger Front Window

Complete window frame must be removed from the door to replace a window and channel.

Don't forget the 2 bolts holding the bottom of the channel/ frame to the inside of the door, and there are AFAIR 3 others around the outside of the door shell, and 1 below where the mirror bolts on, visible with the door trim off .
You also need to remove the mirror and the rubber seals/ trims below it across the top of the door.
JC

Originally Posted by justinc

Complete window frame must be removed from the door to replace a window and channel.

Don't forget the 2 bolts holding the bottom of the channel/ frame to the inside of the door, and there are AFAIR 3 others around the outside of the door shell, and 1 below where the mirror bolts on, visible with the door trim off .
You also need to remove the mirror and the rubber seals/ trims below it across the top of the door.
JC

Thanks mate for the confirmation ......the two bolts at the bottom of the frame are now giving me bother as do not have the right socket !....at least I know now what to do .......many thanks once again ..cheers

Hi Mike, where did you get the new channel and rubber from if you dont mind me asking

Originally Posted by neil 90

Hi Mike, where did you get the new channel and rubber from if you dont mind me asking

Hi Neil,

As per below ,David is the parts guy and it was $45's - the rubber was not included - I am using the old one having scrubbed all the rust off.

British Offroad
British Off Road - The Land Rover spare parts specialists - Home
Bruce Highway,
Forest Glen Sunshine Coast, Queensland, Australia
Ph: 07 5445 1094
Fax: 07 5445 5188

Cheers
Mike