When the front prop shaft is off .... No vibration ... :)Quote:
Originally Posted by DEFENDERZOOK
Replaced propshaft with known good one
Installed brand new propshaft
Removed front diff & had it rebuilt via a Diff expert (noisy pinion bearing)
Checked pinion flange for "true" // (bend pinion shaft & or flange)
Replaced Transfer case (twice :( )
Checked Viscos in T/C for seized (in all three boxes that have been in this car)
Replaced Front bearing to T/C output shaft
Removed all front diff assembly & inspected it // Axles / CV's /swivel preload / wheel bearings / ect
Replaced all rubbers to front end
Removed all rims & tyres // Checked balance & for bent rims
Replaced springs (standard height coils)
The only thing left is to grab someone else's front end and try that :p
Mike
:(
