Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 51

Thread: Swivel preload

  1. #11
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    no this didn't start when new tyres were fitted. I fitted the new tyes in the hope that my other ones were the ones causeing the vibs as they were wearing

    phil the steering damper...I have had a look at old photo's and it is the same as it is now! so damper has been the same from the day you fitted it. it must not of either had those washers with it when delivered or you forgot to put them on. so maybe it is maybe it isn't but if damper has been the same then I don't see how that can cause the vibes and free blay now..

    maybe it is toe in and out but again was doing it way before tyres were fitted. infact car drives straighter now tyres have been fitted no more pull to the right.

    The damper I want to pull off anyway so will be looking at getting a new one of some sort soon.

    wheel bearings...not that old
    UJs................. not that old
    greaseable tie rods...no I dont think they are!

    Bushes on trailing and radius arms........not that old
    Our Land Rover does not leak oil! it just marks its territory.......




  2. #12
    mike 90 RR Guest
    Quote Originally Posted by mike 90 RR View Post
    Lets try to get to the heart of this problem

    Mike
    Quote Originally Posted by dullbird View Post
    no this didn't start when new tyres were fitted
    Question ...
    Did you get a wheel alignment when you installed the new tyres?

    Mike

  3. #13
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    yes
    Our Land Rover does not leak oil! it just marks its territory.......




  4. #14
    mike 90 RR Guest
    Sorry for the one liner Q's Dullbird ... Just trying to keep the pattern uncluttered

    Question
    Is the front end "lifted" or "bog standard"?

    Mike

  5. #15
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    lifted! the car has a 2" lift.


    Just also like to point out that light steering and vibs only became apparent a couple of months before my other tyres became too worn and needed to be replaced. Hence why I originally thought that it was due to my old tyres
    Our Land Rover does not leak oil! it just marks its territory.......




  6. #16
    mike 90 RR Guest
    Quote Originally Posted by dullbird View Post
    lifted! the car has a 2" lift.
    Did the vibe happen straight after the lift .... or much later on?

    Mike

  7. #17
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    no if you mean straight after.

    the lift was one of the first mods done to the car when I first brought it I have owned it 3 years the vib has only been apprent in the last lets say 5 months the lift has been on close to 2 years
    Our Land Rover does not leak oil! it just marks its territory.......




  8. #18
    Join Date
    Apr 2009
    Location
    Yeppoon, QLD
    Posts
    293
    Total Downloaded
    0
    Let's talk about the vibe...

    Is it a shimmy vibe like a bent rim, or is it a higher frequency (4x) like a weight has fallen off the tailshaft balancing?

  9. #19
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    don't really know
    you can't really hear it I don't think you just feel it through the steering wheel.

    Also the vib isn't as aggressive now I have had my tyres changed...but it is still there. it also seems to happen smack on 100kph smooth as at 90 and if you push throught the 100 to 110 not as bad
    Our Land Rover does not leak oil! it just marks its territory.......




  10. #20
    Join Date
    Apr 2009
    Location
    Yeppoon, QLD
    Posts
    293
    Total Downloaded
    0
    Just to ensure it's still not rim/tyre related, would pay to swap fronts with backs and give a test run...

Page 2 of 6 FirstFirst 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!