lt95 to 200tdi d1?

**long stroke** · 11th May 2009, 08:18 PM

Hi all

this might sound stupid or has been discussed before

, but i'm just interested in if anyone has put an lt95 g'bod/transfer into a 200tdi d1?
I can't get my head around wether or not it will raise or lower the gearing compared to the lt77/lt230 combination which i have in it now.
The reason i am thinking about this is, if it will lower not raise the gearing i thought it would be a cheap way of fitting bigger tyres because we have 33's on the county and the gearing is still supper low (lt95 isuzu)

But i'm unshore how it would work mated to a 200tdi

I like the strengh and gear pattern of the lt95, no fuss and easy to use

Thanks in advance TIM.

**Slunnie** · 11th May 2009, 08:44 PM

I'm not sure if the LT95 will mate to a 200tdi.

I was under the impression the only gearboxs in Aus to suit would be the series boxs and the LT77 with the very very odd ZF. I'm pretty sure the LT95 was a V8 and Zoozoo affair only.

**Psimpson7** · 11th May 2009, 08:47 PM

I'm with Slunnie, I dont think it will fit, using off the shelf LR parts anyway.

**long stroke** · 11th May 2009, 08:50 PM

Thanks guys, so you think you could do it with adapter plates etc?

TIM.

**rovercare** · 11th May 2009, 08:53 PM

Originally Posted by long stroke

Thanks guys, so you think you could do it with adapter plates etc?

TIM.

You can make ANYTHING fit with adaptor plates

Dunno of any off hand for a 200tdi, custom jobbie, not really worth the expense

4.11's are the answer

**long stroke** · 11th May 2009, 09:00 PM

Originally Posted by rovercare

You can make ANYTHING fit with adaptor plates

Dunno of any off hand for a 200tdi, custom jobbie, not really worth the expense

4.11's are the answer

Looks like it would end up cheaper going the 4:11's

Thanks

Thread: lt95 to 200tdi d1?

Thread Tools

lt95 to 200tdi d1?

Bookmarks

Bookmarks

Posting Permissions