Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: Show us your Bar or Setup

  1. #11
    Join Date
    Jun 2008
    Location
    Shropshire, UK
    Posts
    1,722
    Total Downloaded
    0
    Some updated photos for you guys, or anyone insterested!
    Finished up to this stage this weekend......

    Went for a tiled top, as originally discussed.
    Just waiting for the electrics to be installed so I can get rid of the extension cords.
    Front and side rendered areas to be painted (one day!), and hopefully a detachable or rectrable roof/covering of some sort.
    Again, one day, when funds permit.

    As for now, I'm pretty chuffed with it as it is.
    Going to install an aerial for TV (cinema room behind back wall so should be pretty easy).
    Chessboard is mosaic tiled and looks better in real life than on the photos.
    Thanks to BST4X4XFA for donating the aluminium trim for around the bar top edging, and to TELF RRC for the inspiration to get on with it in the first place!

    I'll try to arrange a session for anyone local soon.

    Cheers guys!
    Attached Images Attached Images

  2. #12
    Join Date
    Apr 2009
    Location
    Darch,Perth NOR, WA
    Posts
    423
    Total Downloaded
    0
    Looking good there mate!

  3. #13
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Nice work,all thats needed is a chimnea or similar and a waterproof shade cloth cover.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  4. #14
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,942
    Total Downloaded
    0
    All I've ever had is a fridge in the shed and fire, my old mans got a big barn fully lined with 8x5 pool table and all the rest, but we all seem to end up drinking in the workshed leaning over an engine bay

  5. #15
    Join Date
    Apr 2009
    Location
    Darch,Perth NOR, WA
    Posts
    423
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Nice work,all thats needed is a chimnea or similar and a waterproof shade cloth cover.
    Andrew
    I've got the chiminea, funnily enough with a large hole in the shade sail directly above!

  6. #16
    Join Date
    Apr 2009
    Location
    Darch,Perth NOR, WA
    Posts
    423
    Total Downloaded
    0
    I'll have to start thinking about that WA-AULROians night at the Outside Inn. I reckon that would be a good night!

  7. #17
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,935
    Total Downloaded
    0
    Mate that is brilliant, bloody nice job

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  8. #18
    kenleyfred Guest
    Quote Originally Posted by TELF RRC View Post
    I've got the chiminea, funnily enough with a large hole in the shade sail directly above!
    Good placement then. To put the chiminea directly under the existing hole.

  9. #19
    Join Date
    Apr 2009
    Location
    Darch,Perth NOR, WA
    Posts
    423
    Total Downloaded
    0
    Quote Originally Posted by kenleyfred View Post
    Good placement then. To put the chiminea directly under the existing hole.
    I did not expect two of those yellow card six pack holders you get corona in to generate a 14ft column of flame.

    But now that I know.......

  10. #20
    Join Date
    Jun 2008
    Location
    Shropshire, UK
    Posts
    1,722
    Total Downloaded
    0

    ** UPDATES **

    Tiled bar top and rear shelf replaced with jarrah (bar top = 2x1m for scale).
    Shade sail added for some cover.
    The floor has been "kind of" decked with plastic backed wooden tiles that clip together).
    TV points been installed on back wall.
    All that's left now is to paint the render panels.....
    Attached Images Attached Images

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!