I was up at the Dowerin field day on Wednesday and noticed Alemlube had a stand.Out of interest enquired on the cost of their ATF flushing machine 47070A....show special price $5500.Looking on the Bay there are machines that appear to do the same job for a lot less Gearbox Oil Exchange Changing Cleaner Cleaning Machine Stable Safe Vevor 871248662264 | eBay We have a few vehicles to change the atf on, the only problem is understanding the 'chinglish' translation of its operation.Has anyone experience with these machines from China?
Last edited by RANDLOVER; 28th September 2019 at 12:05 PM. Reason: Spelling
2005 D3 TDV6 Present
1999 D2 TD5 Gone
The description of our troubles is here: Darwin - Pilbara and Return
This was at 282K km. When we bought the vehicle we were told it had a 'new' transmission at 160K. We purchased at 217K and it had a full flush at 220K. I intended to do it at 280K but decided I would get it done after we got back from the trip.
After umming and ahhing and undertaking untold research, we decided that we would keep the vehicle and invest in a rebuilt replacement transmission and keep the vehicle long term. Our mechanic provided us with a quote to remove the mechatronic and airfreight it to Dandenong where it was placed into a rebuilt transmission and fully tested. The unit was then freighted to Darwin and installed in our vehicle and the software for the mechatronic updated. Our old transmission is now on its way back to Dandenong. We also had the engine main seal replaced while the transmission was out as that was beginning to leak.
We have only had the vehicle since lunchtime after we arrived back from a week away. Obviously it is much smother all round than it was, although the vehicle still has to think for about 1 - 1.5 seconds from a standing start if you want to accelerate quickly. I had hoped the software update may have fixed that.
The vehicle has to go back to have the transmission checked in 30 days or 1,000 km (whichever is first). The transmission runs out of warranty either in 2 years or 50,000km whichever is first and for us it will most likely be the 2 years.
Cheers, Dale
PIC - It comes with the Territory
'The D3' - 2006 TDV6 HSE
2008 Kimberley Kamper Sports RV
Previously Enjoyed:
2002 Adventure Offroad Campers 'Cape York'
2000 D2 Td5 - plus!
1997 Defender 110 Wagon - fully carpeted
Can I ask the cost?
My D4 (2011 HSE with 308,000kms and had since new) is feeling very poor. Had the flushed and pan upgrade etc but afraid its 300,000kms has the box failing.
- locking and unlocking on down hill (no braking at all)
- Shift under heavy foot is a big thump and occasional no go for before it finds a gear....
- feels crap...
Anyone had their 6 speed done in Perth?
thanks
I didn't include in the post above that I had not had any shudder at all. In the last 2 or 3 weeks before we left on the trip on 3 July I had noticed a slow change up once or twice when towing a box trailer of palm fronds to the dump - barely a 500kg load.
The cost of the transmission - swap of mine for the rebuilt unit - was $5,500. Being in Darwin the freight (on the account of the re-manufacturer not my mechanic) was $700 total. 6 hours labour for the job including a new rear main seal while it was out.
Not many options for the rebuild here in Darwin (I don't know what you have in Perth) but mine came from a reputable and recommended firm with the 2 year or 50,000km warranty which is some reassurance. It back to the mechanic in a week or two for the mandatory 1 month or 1,000km check under the warranty.
Cheers, Dale
PIC - It comes with the Territory
'The D3' - 2006 TDV6 HSE
2008 Kimberley Kamper Sports RV
Previously Enjoyed:
2002 Adventure Offroad Campers 'Cape York'
2000 D2 Td5 - plus!
1997 Defender 110 Wagon - fully carpeted
I had mine done at automac
Automac Transmissions | Perth's Trusted Transmission Specialists
They where going to rebuild mine, but once it was apart decided the damage was to great and sent the box to ZF in Sydney as they have the capacity to load test them before installation. They wanted to make sure it was 100% as I was living in the Pilbara at the time and we didn't want any warranty issues.
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
Might be a bit late, but Auto Trans R Us in Balcatta are my go to (still for anything transmission that DazzaTD5 hasn't time to do).
They rebuilt my 4HP24 in the RRC and fitted Trutracs and an additional ATF cooler for my D2a and some other bits like an HD torque converter, plus always ready to provide advice.
MY16 D4 TDV6 - with a little Cambo magic for towing "The Brick"
MY95 RRC LSE Vogue Softdash "Bessie" (turning circle comparable to QE II) with MY99 TD5 and 4HP24 transplants. Back home Nov 22 after a magic overhaul by Chivalry
SADLY SOLD MY04 D2a TD5 auto Classic and MY10 D4 2.7 both with lots of goodies
Charge from them was a total of $7462
The main bits where:
Labour $1150
Trans rebuild $4150
Torque Converter $595
Oil $420
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks