Results 1 to 3 of 3

Thread: Discovery 3 electrical gremlins *Relocated Thread*

  1. #1
    Join Date
    Jun 2021
    Location
    Melbourne
    Posts
    9
    Total Downloaded
    0

    Discovery 3 electrical gremlins *Relocated Thread*

    Hi all,

    I know these posts circulate most forms (as I've tried to read through most) however like most, realise there is some slight iteration which does not specifically apply to mine but if this has been mentioned prior please forgive!

    I own a 2008 Discovery 3 HS which I've had for about 6 months which has plagued me with reliability issues (should have hadthe vehicle inspected before purchase I know). Anyways, I do love the Disco with my parents owning one when they first came out and never seemed to have any issues which is why I took the plunge although its been a love/hate relationship to say the least.

    Current issue I am having is to do with the suspension.. I think. Ever since I went for 3-hour drive to the Otway’s national park the Disco has developed a suspension/transmission warning issue. The three amigos will appear with the standard transmission/park brake fault, I switch the car off and back on and everything will clear. I'm not sure if maybe the twists and turns of the National Park has done something to the leveling sensors however did recall the back left not sitting aligned with the rest ofthe wheels. On the 3-hour drive back it only faulted twice however now that I'mback in Melbourne it seems to be faulting much more frequently i.e. once every 20 minute drive.

    When the faults appear, I pull over as the car begins to lower to access height and turn off. I then turn the car back on and it appears the car has selected off-road height on the selector however not on the cluster. I have to then raise the vehicle into off-road height and then lower it back to normal drive height and then drive off.


    I purchased a code reader and have the below current faults

    Fault Description
    U0132 Lost communication with ride level control module
    P0000 NO DTC DESCRIPTION
    U0101 Lost communication with transmission control module
    U0100 Lost communication with engine control module/powertrain control module
    U0402 Invalid data received from transmission control module
    U0416 Invalid data received from vehicle dynamics control module
    U0421 Invalid data received from ride level control module
    U0401 Invalid data received from engine control module/powertrain control module
    U0155 Lost communication with instrument cluster control module
    C1A96 Brake light switch circuit
    P0504 Brake switch a/b correlation


    Note: - I have already changed the brake switch.
    - Air compressor can sometime be heard for 30 seconds when starting
    - No sagging is apparent when leaving the car for multiple days

    I know this is a long-winded story which has been posted various times over however with all the money I've already sunken into this car I need to diagnose these problems myself is possible. I'm not expecting a silver bullet fix but any suggestions, troubleshooting or similar experiences would be greatly appreciated!

    My inexperienced theory is something to do with the levelling sensors.

    IMG-3032.jpg

    *Edit since other suggestions*
    Below is photo of brake light switch whiich I purchased off eBay. I have removed and replaced with original LR part as it didn't seem to be the issue from previous electrical problem I had so no reason to believe it is faulty. Also, when assessing the replacement part from eBay the trigger seemed to almost grind, definitely not as smooth as original LR part.

    Have not yet checked Transmission ECU however will this weekend. LR did a full diagnosis of the modules over the course of a few days, so I'd hope they checked that as well.

    Also last night when driving, received similar error however this time only 2 dash lights appeared and car did not go into access mode (blurry photo).

    The brake lights seem to be working fine and the battery is around 2 months old.

    I will see if placing the old brake senser in does anything otherwise very much open to new suggestions.

    IMG-3059.jpgIMG-3060.jpgIMG-3055.jpg

    Cheers
    Conah




  2. #2
    Join Date
    Apr 2015
    Location
    Hervey Bay
    Posts
    531
    Total Downloaded
    0

    Sounds like CAN BUS issues

    Sounds like you are having a CAN BUS issue. Here is a couple of videos to watch that might help.

    Can-bus Trouble - YouTube


    How to test a CAN bus network with a meter - YouTube
    04 L322 Vogue V8 - Work truck
    07 Freelander 2 TD4 SE - The wifes
    74 Leyland P76 Targa Florio - Aspen Green
    91 Kawasaki GPZ900R


    Previous LRs = 78IIa series - 81, 93, 95 RRC - D2V8

  3. #3
    Join Date
    Jun 2021
    Location
    Melbourne
    Posts
    9
    Total Downloaded
    0
    Thank you FisherX

    I will check these out. From the last issue I had, LR advised it was to do with CAN BUS however seemed to fix it. Unfortunately this one has occurred which is slightly different but probably related

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!