Page 8 of 9 FirstFirst ... 6789 LastLast
Results 71 to 80 of 84

Thread: Turbos that work on a 4BD1.

  1. #71
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    Interesting that a couple of you describe the HX30W as laggy. Obviously you haven't drive an auto D1/D2 lately!!

    Prior to my HX30W I was running a T25G - basically a T25 with a larger compressor. No intercooler.
    Wastegate wired shut, decent low-mid performance but definitely choking under high load or RPM. EASILY saw 750decC pre-turbo.
    With the HX30W and same fuelling I haven't noticed any increase in lag, and max EGT has never gone above 650degC pre-turbo no matter how much I push it.

    Anyone with a laggy HX30W running a tacho? Roughly what RPM are you seeing significant boost and when do you hit 20psi?

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  2. #72
    Join Date
    Aug 2011
    Location
    Hunter Valley NSW
    Posts
    291
    Total Downloaded
    0
    Anyone with a laggy HX30W running a tacho? Roughly what RPM are you seeing significant boost and when do you hit 20psi?
    Got one hooked up but need to calibrate it.

    Below is an indicator of where my HX30W needs to be...at below 100 it lacks punch, at 110 I can hold almost any hill. Remember though my HX30W may not be identical to yours, there is variation within the model.

    I'd like my peak torque to be a few hundred rpm lower.


  3. #73
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    Quote Originally Posted by Fubar View Post
    Got one hooked up but need to calibrate it.

    Below is an indicator of where my HX30W needs to be...at below 100 it lacks punch, at 110 I can hold almost any hill. Remember though my HX30W may not be identical to yours, there is variation within the model.

    I'd like my peak torque to be a few hundred rpm lower.

    Thanks.
    Yours is the same as mine, just mine was a brand spanker as they didn't have any red devils in stock at the time. Essentially they are the middle size version of HX30W.

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  4. #74
    Join Date
    Mar 2019
    Location
    New Zealand
    Posts
    11
    Total Downloaded
    0
    Quote Originally Posted by Bearman View Post
    Can you put up a photo of the setup so we can have a look at it.
    Any good for a Perentie?

    Garret A/R 80 M24 (T25G from a Nissan SR20 I think?)


    Compressor A/R 80
    Compressor wheel 54mm??
    Turbine A/R 64



    20190513_110243.jpg20190513_110317.jpg20190513_111235_007.jpg20190513_111255.jpg

  5. #75
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0
    If the turbo is from a SR20DET motor it should be a T28, which will work well. I used a T28 roller bearing version on my 4BD1 with the same Isuzu factory manifold.

    The T28 fan housing is bigger than hot side, but difficult if that’s the case with your turbo with it being separated.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  6. #76
    Join Date
    Mar 2019
    Location
    New Zealand
    Posts
    11
    Total Downloaded
    0
    Could be a T25G up until 1994 after that they are T28 apparently?
    Nissan SR20DET - Wikipedia

    T28 looks like this, so is different from mine.
    NISSAN SILVIA S15 SR20DET OEM GT28R BALL BEARING TURBO - JDMDistro - Buy JDM Parts Online Worldwide Shipping

    I have no idea what it actually came out of.

  7. #77
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0
    This is what my T28R turbo looks like.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  8. #78
    Join Date
    Mar 2019
    Location
    New Zealand
    Posts
    11
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    This is what my T28R turbo looks like.
    Still need a dump pipe for mine. Do you have specs on yours?

  9. #79
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0
    The dump pipe was made by an exhaust shop using off the shelf flange.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  10. #80
    Join Date
    Aug 2015
    Location
    Brisbane
    Posts
    93
    Total Downloaded
    0
    It seems the hardest thing to solve is an exhaust housing and wheel that is not too restrictive, yet not too large.
    I have a he221w 5.5cm on my perentie and a hx30w on my county, I find the hx30w laggy, and I think the he221w 5.5cm chokes the top end, too restrictive in the exhaust.
    They are both fun to drive, if anything the he221w is "boring" because there's no lag at all.
    IMO TD04HL-19T and HE221W 7cm look to be in a sweetspot, slightly bigger wheel size than the 5.5cm, but smaller than the hx30. I have seen some people running these turbos getting great results and 30psi or so...

    Chart sorted by turbine wheel inducer diameter...

    compressor Turbine
    model A/R TRIM ind (mm) exd (mm) A/R TRIM ind (mm) exd (mm) cm^2
    HE221W 56 43.5 58 81 48.46 43.5 5.5
    GT2252 0.51 60 40 52 0.67 72 50 43
    HE221W 56 43.3 58 77 51.7 45.3 7
    TD04HL-19T 67 46 56 77 52 45.6 6
    GT2554R 0.8 60 42.11 54 0.64 62 53 41.73
    GT2860R 0.6 62 47 60 0.64 76 54 47
    TD05H-18G-6cm 0.6 55 50.5 68 77 56 49.2 6
    HX30W 34 40.2 69 63 65.5 52 6
    NB: We cannot calculate the A/R because we do not know the shape of the cross-sectional area, and how far it is from the turbo centerline.
    TRIM: The trim of a wheel, whether compressor or turbine, affects performance by shifting the airflow capacity. All other factors held constant, a higher trim wheel will flow more than a smaller trim wheel.
    Compressor A/R: Compressor performance is comparatively insensitive to changes in A/R. Larger A/R housings are sometimes used to optimize performance of low boost applications, and smaller A/R are used for high boost applications.
    Turbine A/R: Turbine performance is greatly affected by changing the A/R of the housing, as it is used to adjust the flow capacity of the turbine. Using a smaller A/R will increase the exhaust gas velocity into the turbine wheel. This provides increased turbine power at lower engine speeds, resulting in a quicker boost rise. However, a small A/R also causes the flow to enter the wheel more tangentially, which reduces the ultimate flow capacity of the turbine wheel. This will tend to increase exhaust backpressure and hence reduce the engine's ability to "breathe" effectively at high RPM, adversely affecting peak engine power. Conversely, using a larger A/R will lower exhaust gas velocity, and delay boost rise. The flow in a larger A/R housing enters the wheel in a more radial fashion, increasing the wheel's effective flow capacity, resulting in lower backpressure and better power at higher engine speeds.

    source: https://www.garrettmotion.com/wp-con...o-Tech-102.pdf

Page 8 of 9 FirstFirst ... 6789 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!