Thread: LT 95

From what I have:

lt85
1: 3.649
2: 2.18
3: 1.436
4: 1
5: 0.795

lt95
1: 4.07
2: 2.45
3: 1.51
4: 1

What transfer ratio you have will make a fair difference.

thanks scott

i was actualy after the difrent final drive ratios IE .996, 1.2?? 1.3?? i think as well as the 2 ratios for an overdrive

If you are swapping to an LT95, you want the 0.996 ratio high range.

Originally Posted by ScottW

If you are swapping to an LT95, you want the 0.996 ratio high range.

no i am looking at swaping out the .996 to a lower but adding an overdrive

.996 and 33in or 285x75x16 or 255x85x16 tyres is near a perfect match for the isuzu atmo or turbo

Originally Posted by lokka

.996 and 33in or 285x75x16 or 255x85x16 tyres is near a perfect match for the isuzu atmo or turbo

well that is what i have Now, .996 and 33"12.5" 15"

if i drop from the .996 to the V8s 1.3 ( i think) then up again with an over drive etc

but i am not sure about final drive ratios for an LT95 nor do i know what the ratios are for an overdrive??

This will make it easy

Ashcroft Transmissions - Ratio Calculator

I think this is what you are after..



AFAIK the taper conversion was only ever .996