Now, I'm not sure how this happened, but I bought isuzu part 8941697751 which is the pipe on the 4bd1T (as per 6x6 RPS) and it is different to the pipe steveG has used. This one has 1/4" BSPT outlet and is thicker, looking like I need the space to be 54mm long and 42mm hole centers... Has anyone else had it like this?
I know KLR Automotive have the spacer blocks in stock. I saw one on the desk and asked what it was for.
Last edited by p38arover; 18th November 2019 at 08:23 AM.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
I purchased the housing spacer from them, yes, but the top pipe to oil cooler spacer appears is LRA part AYG0474, which is purchasable through land rover AU for $306.
I ended up having that part made by a machine shop locally, cost me $200. The housing spacer block from KLR is $70+.
Camma, SteveG, does anyone know what the part number is for that pipe you have used?
I used the pipe from the 6x6 4BD1T RPS and my spacer is 54mm long and has 42mm bolt hole centers to match the oil cooler.
I had a recess machined into one side of the oil cooler mating face (for o-ring) to mimic the original 4BD1 pipe.
Then I filed out the holes on the pipe.
Also, the o-ring seal I got from isuzu that is listed in the RPS for the 4BD1 oil pipe to cooler 1096233950 does not actually fit the recess.
I went to a seal shop locally, and got some o-rings to fit.
oil-filter-housing.jpg
Here is a list of the parts I used to complete the conversion in the above photo:
qty price each part supplier 1 $70.00 oil filter spacer KLR 2 $4.00 gasket oil filter housing KLR 1 $170.00 oil filter housing with filters 8943604181 ebay 1 $66.00 threaded rod M10x1.25 1M length HT united fasteners 1 $184.23 pipe oil filter to cooler 8941697751 isuzu 2 $5.45 gasket oil cooler pipe o ring 8970265900 isuzu 1 $200.00 spacer 54mm len eljay engineering 1 $5.00 1/4" bspt blank powell industrial 1 $2.50 o-ring gasket original oil pipe viton benco seals 2 $2.50 M8x1.25x110mm (cut off 4mm) HT bolt shop $709.67 total
Yes, this ended up being more expensive than I expected, but it's done now, hopefully this does not cause any problems down the track
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks