OK thanks Isuzurover.
Will have to look into it closer then.
Cheers.
OK thanks Isuzurover.
Will have to look into it closer then.
Cheers.
Many years ago I had a Ranger overdrive from the US, this was an overdrive that sat on the primary pinion and the whole gearbox/transfer box moved back about 8 inches, The one I had was for a Land cruiser box, but I've never seen one for an LT95. If you could find one to suit the LT95 primary pinion it would be a design that would not disrupt your 6X6 mechanism although you would have to shorten both rear prop shafts and lengthen the front.
Thanks Lotz-A-Landies.
Anybody know if the msa5r will go in place of the msa5g? I understand the bell housing is different due to the starter, but not sure on the rest.
I'm likely wrong, but thought those 2 boxes were the same apart from ratios. The mXa is different though.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Yeah I think your right Steve. Bell housing is vastly different though. Will just buy it and see:-)
I checked yesterday if a adaptor housing for a MXA would fit a MSA gear box.Turns out a simple 6mm thick washer with recess for100mm bearing and snap ring one side and same for 90mm the other side.Turns out the MSA I thought was a 5R was a 5 S wich I had not seen before.
Ratios. 1st. 4.987
2nd. 2.870
3rd. 1.684
4th. 1.000
5th. 0.778
R. 4.774
AM
who has a 4bd1 lt85 to lt230?
my one maxes out about 80ks maybe 85 down hill in 4th but i have driven one other with the same set up that was easily getting 90 before shifting to 5th and owner recommended not to use 5th until after 90ks. i no the lt230 comes in lots of different ratios.. not shore about the lt85 mine is the early type without split case dos split case have hire gear ratios?
by the way Kevin at rovertech in Perth said he knows a guy in QLD that dose a relay nice Isuzu gearbox modifications for land rovers iv been meaning to ring him back and ask more about it but i haven't got round to it yet as im not realy in the market for a new transmission. but ill post it up here if i fined out what the mod is.
or give him a call and pick his brains if your relay keen to hear about it
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks