Master
Hi All,
This morning the shroud behind the radiator on my 4BD1T fell off into the fan. By the time I stopped the fan blades were quite a bit shorter and the shroud had been badly chewed up. Does anyone know where I might be able to find replacements for either part in Brisbane? I'm on Brisbane northside so anything north of the river would be great.
Cheers, Dave.
TopicToaster
SubscriberThat's a bugger Dave.
Can't help with parts suppliers up your way, but if you get stuck for a fan the Patrol TD42 viscous fans are a pretty close fit - even as a temporary solution.
Holes on the viscous hub that connect to the waterpump need to be opened up slightly (to 8mm from memory) , and about 20mm trimmed off the blades (not a problem if your shroudless!!).
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Master
Originally Posted by Dave_S
a v8 range rover shroud will fit easily with a little trimming on the side.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks