Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: my 110 county turbo build thread

  1. #21
    Join Date
    Sep 2017
    Location
    Melbourne
    Posts
    17
    Total Downloaded
    0
    Quote Originally Posted by asmit View Post

    I could not source a V-band clamp to suite the cummins flange, so I welded to it, tig on the inside to seal it, then mig the outside for streangth and looks. I did make a point of fitting a 2.5" vband clamp just under the turbo there to make the exhaust easily removable.

    Attachment 142137
    asmit, is that the 2.5" dump pipe?

  2. #22
    Join Date
    Jan 2007
    Posts
    1,251
    Total Downloaded
    0
    Just buy or make a steel undivided 10-12mm T4 spacer...we did..cost 60 bucks tho at a speed shop..drill out the threaded holes which are normally used for inlet manifolds...get another gasket and away u go.

    Simple...also gives more space to reuse the heater pipes..with a little re bending to clear the compressor housing.

  3. #23
    Join Date
    Aug 2015
    Location
    Brisbane
    Posts
    93
    Total Downloaded
    0
    Quote Originally Posted by McBrain283 View Post
    asmit, is that the 2.5" dump pipe?
    Yes that is 2.5" pipe. Just downstream of the vband clamp there it expands into a 3" pipe.

    Quote Originally Posted by INter674
    Just buy or make a steel undivided 10-12mm T4 spacer...we did..cost 60 bucks tho at a speed shop..drill out the threaded holes which are normally used for inlet manifolds...get another gasket and away u go.
    Do you mean T3? (the HX30w is T3 and this model of manifold is T3)

    This is a good approach, definitely makes the job less work to re-use the heater pipes, and a convenient location for the EGT probe!

  4. #24
    Join Date
    Jan 2007
    Posts
    1,251
    Total Downloaded
    0
    Yes sorry T3..got club hands😐

  5. #25
    Join Date
    Jan 2007
    Posts
    1,251
    Total Downloaded
    0
    Re the dump pipe..we intended 3" all the way but the pipe is too big to avoid damage on a Perentie being located under the door sill so were going 3 into 2.5".

  6. #26
    Join Date
    Sep 2017
    Location
    Melbourne
    Posts
    17
    Total Downloaded
    0
    Finally got it all together and running. Took if for a long test run on the weekend and all good so far.

    1.5 turns out on the fuel and making 630egt pre-turbo. I don't have a boost gauge on it yet but the clutch slips at those egts in 4th gear on the big hill.

    Got a bunch of bits to clean up but she's 99% there.

    Exhaust is temporary as I will go bigger from the dump pipe aft when I get a chance to mod it.
    Attached Images Attached Images

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!