Power Steering Pump Fitting

**debruiser** · 24th October 2018, 02:47 PM

I fitted a power steering pump to my Perentie 110 recently, I bought a hose kit but not the right pump for the kit. I've ended up with pump :

ISUZU 4BD1T/4BC2OLD POWER STEERING PUMP-44306-1160QA | AJM Auto Continental Corp Sdn Bhd A DISTRIBUTOR OF JAPANESE AND EUROPE TRUCK PARTS MALAYSIA

It has a flat flange style fitting on the low pressure side with 2 bolts to hold it in place. I looked on the REMLR parts book and I think maybe I need part no 5133112580 (page327 of the 4x4 perentie combined v1.01 pdf) I called a couple places but so far no luck finding one.

Does anyone have a lead on one? I dont care if it's second hand as long as it's serviceable.

Maybe it's an obsolete part number? does anyone know what the new number is?

HELP!

Thanks in advance 44378475_10160968020495147_7854911691602001920_o.jpg IMG_20181007_094727.jpg

**debruiser** · 31st October 2018, 09:50 AM

So after a bit of a call around to a few LR parts places I found that that part is no longer available.

On facebook, someone suggested a Garrett T35 oil flange. I ordered one of those and OMG it fits! I needed a couple of AN10 fittings to complete the setup, I got an AN10 elbow and an AN10 elbow to 5/8 barb. Sorry I didn't note the part numbers.

I have run the car for a few minutes and turned the steering a little, all seems well but the real test will be when I go for a drive I guess.

Some info for all of you who are tight arses like myself.

**Vern** · 31st October 2018, 10:14 AM

I was going to say the other day on here to use a turbo drain fitting, i must have got sidetracked

Thats what i used when i did mine a few years ago

**debruiser** · 1st November 2018, 07:03 AM

Thanks for the thought anyway Damien.

Latest update on the fix - all is well after a 20+km drive. Went across town and down to the beach where there are a few tracks to give the PS a bit of a work out and all the fittings are nice and clean and dry.

Down side of my fix was that the local parts shop only had ricer colour fittings! so now i have blue and red AN fittings

if i'm not careful pretty soon Liz will be looking like this: