Common Replacement parts for 4BD1 - sourcing

Quote:

---

Originally Posted by Traveler

changed the oil cartridge today and had to use a cartridge listed as a 4bb1 motor...cartridge has hole one end size of 5c piece other end about 1 1/2"...4bd1 cartridge has holes each end the same, and smaller than the rod that screws into pump...anyone experience this?

---

Yes - the filter on the Landrover installation is different from the filter in other applications, as the filter had to point up to avoid hitting the front diff (and to make it less likely to get knocked off by sticks). But catalogues that list by Landrover rather than Isuzu seem to mostly get it right.

John

Quote:

---

Originally Posted by Traveler

changed the oil cartridge today and had to use a cartridge listed as a 4bb1 motor...cartridge has hole one end size of 5c piece other end about 1 1/2"...4bd1 cartridge has holes each end the same, and smaller than the rod that screws into pump...anyone experience this?

---

Buy yourself an industrial engine filter housing (cheap) and use screw on filters. Mine uses a Ryco Z419 I think and you can easily get better quality filters. It still makes a mess when you change it but they are available everywhere and you can easily remote mount a filter if you want and reduce the mess when you change it.

Rick

Quote:

---

Originally Posted by defenderbilby

I have a project Isuzu 120 underway and cann't source the alternater and a/c compressor brackets.
The bracket that I have for the alternater wont allow me to fit the a/c so I need both from an engine that had a/c.
If these cann't be found is it possible to cast them from a borrowed set of brackets?
I brought some brackets from a truck and they are very different to the landrover ones and dont allow me to fit the larger a/c compressor.
Thanks, David.

---

SuziWreck in Fairfield were great when I was in Sydney. Might be worth a try.

Justin

Quote:

---

Originally Posted by DRanged

SuziWreck in Fairfield were great when I was in Sydney. Might be worth a try.

Justin

---

they are not there anymore. Either moved or closed.

anyone know the specs or have pics or have one in the flesh

adaptor block to invert the dual 4bd1t oil filter assembly for a 110 ?

For engine hard parts contact SMS Diesel in your state on 133767.
I am a bit biased here.... mainly as I'm the WA rep!!