head gasket

Where's the pics?:mad:

Not sure how I missed this one, but here's my 2c.

Genuine Isuzu 4BD1T engine gasket set PN 5-87812761-1
The year I quoted was 86 for the engine, this one had the IHI RHB6 turbo originally.

I wasn't given the choice of gasket thickness and I can't see the tab on the gasket with the notches while it's in the vehicle. Two weeks ago I had it out, would have been easy.
Cost me about $NZ300 almost 3 years ago now. It included inlet/exhaust and turbo gaskets, valve stem seals, thermostat gaskets, sump gaskets, crank seals, timing case seals, copper seats for injectors etc.

Quote:

---

Originally Posted by Dougal

Not sure how I missed this one, but here's my 2c.

Genuine Isuzu 4BD1T engine gasket set PN 5-87812761-1
The year I quoted was 86 for the engine, this one had the IHI RHB6 turbo originally.

I wasn't given the choice of gasket thickness and I can't see the tab on the gasket with the notches while it's in the vehicle. Two weeks ago I had it out, would have been easy.
Cost me about $NZ300 almost 3 years ago now. It included inlet/exhaust and turbo gaskets, valve stem seals, thermostat gaskets, sump gaskets, crank seals, timing case seals, copper seats for injectors etc.

---

Here you go. I was given no choice of head gasket either from Isuzu. Top end gasket kit, as per Dougals p/n $242 AUD. Same here I quoted NPR59 86 model but the Isuzu guy said all the numbers now supersede to a set of numbers which cover a lot of models. No notches or indicators on the gasket. No choice of head gasket for 4BD1T
https://www.aulro.com/afvb/images/im...2008/07/32.jpg
https://www.aulro.com/afvb/images/im...2008/07/31.jpg