Thread: Isuzu Land Rover stickers

Well there seems to be a lot of interest in the stickers. I've added the word 'Diesel' to 2 of them (see the first post).

Numbers requested so far are between 20 and 30 of each of the 3 designs. I'll see if I can get a quote tomorrow for say, 50 of each one.
I'll see what I can do about a '3.9 Tdi' version, but can't promise anything if it's a hassle to do a smaller run of them.

Thanks for the interest so far.

Originally Posted by rijidij

I'll see what I can do about a '3.9 Tdi' version, but can't promise anything if it's a hassle to do a smaller run of them.

John (Bush65) and I make 8
Dougal - you want any?

I am happy to order more if it makes the difference.

I'll be happy to purchase two of the diesel ones and also two "turbo diesel" ones just in case I fit one in the future

Originally Posted by isuzurover

John (Bush65) and I make 8
Dougal - you want any?

I am happy to order more if it makes the difference.

Put me down for 2 if that'll give you sufficient numbers.

What are the dimensions? The existing Landrover Sticker is 18.3cm across.

And any decision on the more appropriate silver on black for the Landrover Logo? From memory, the green logo was only used after the Isuzu engine stopped being fitted, from when Landrover changed from a model to a brand with the introduction of the Discovery.

John

Does anyone know what the official ISUZU font is?

Originally Posted by JDNSW

What are the dimensions? The existing Landrover Sticker is 18.3cm across.

And any decision on the more appropriate silver on black for the Landrover Logo? From memory, the green logo was only used after the Isuzu engine stopped being fitted, from when Landrover changed from a model to a brand with the introduction of the Discovery.

John

JD - if you re-read the first post, you will see the dimensions are there (120x65mm). Plus a pic of a sticker on an isuzu 110 air filter housing - should be easy to work out all dimensions from that.

Personally - I am not particularly fussed about originality of the LR badge. And I think half the people wanting stickers have ISUZU-powered rangies...

Dougal - cheers! - 10 now. Anyone else?

Originally Posted by isuzurover

JD - if you re-read the first post, you will see the dimensions are there (120x65mm). Plus a pic of a sticker on an isuzu 110 air filter housing - should be easy to work out all dimensions from that.

Personally - I am not particularly fussed about originality of the LR badge. And I think half the people wanting stickers have ISUZU-powered rangies...

Dougal - cheers! - 10 now. Anyone else?

Its that many posts since the first one I had forgotten the original one had the dimensions. I would still prefer one that exactly replaces the original one, but I'll get whatever comes out as long as the price is reasonable.

I note a three to five year lifetime is guaranteed - so far the original sticker is in its twenty-second year and is just starting to show signs of deterioration, unlike the pressed aluminium one on the 2a, which is as good as new after forty years.

John