Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: oil filter

  1. 27th November 2008, 11:14 AM #1
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB

    oil filter

    i am over the old style bolt and canister oil filter.... messy dam thing it is

    anyone have one of the 60mm spacers for the twin oil filter they arent using or knows where to get hold of one or has a picture of one showing internal structure or layout so i can get one made ?

    or

    has a filter block to suit the single screw on filter assembly ?
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  2. 27th November 2008, 11:39 AM #2
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Doesn't this belong in the markets?

    Single filter is still messy, as its still (blackboard voice) "upside down, upside down"
    Reply With Quote Reply With Quote
  3. 27th November 2008, 01:12 PM #3
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    Quote Originally Posted by rovercare View Post
    Doesn't this belong in the markets?

    Single filter is still messy, as its still (blackboard voice) "upside down, upside down"
    but i can fit a remote head to that style housing i believe. i dont know of one for the existing unit.
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  4. 27th November 2008, 02:46 PM #4
    Bigbjorn
    Bigbjorn is offline Swaggie Gold Subscriber
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    UncleHo told me you were a fitter-machinist. Why don't you make them. You can use my lathe if you have not got one.
    URSUSMAJOR
    Reply With Quote Reply With Quote
  5. 27th November 2008, 02:48 PM #5
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    Quote Originally Posted by Brian Hjelm View Post
    UncleHo told me you were a fitter-machinist. Why don't you make them. You can use my lathe if you have not got one.
    sounds like a plan

    i dont have a lathe, i dont have anywhere to put one

    will send you a PM in due course.....
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  6. 27th November 2008, 06:15 PM #6
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    but i can fit a remote head to that style housing i believe. i dont know of one for the existing unit.
    Ah ha, I see
    Reply With Quote Reply With Quote
  7. 27th November 2008, 08:54 PM #7
    DiscoDave's Avatar
    DiscoDave
    DiscoDave is offline Wizard
    Join Date
    May 2006
    Location
    now near Lithgow, centre of the Universe.
    Posts
    1,152
    Total Downloaded
    0
    And the problem with half a litre of black goop dribbled all over the engine, the front propshaft and finally ending up on your driveway is what exactly?
    Reply With Quote Reply With Quote
  8. 27th November 2008, 10:11 PM #8
    rijidij's Avatar
    rijidij
    rijidij is offline ChatterBox Subscriber
    Join Date
    Jan 2007
    Location
    SW of Geelong
    Posts
    2,383
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    anyone have one of the 60mm spacers for the twin oil filter they arent using or knows where to get hold of one or has a picture of one showing internal structure or layout so i can get one made ?
    These dimensions are accurate, but don't scale off the drawing.
    If you're running a turbo you will have to machine a flat on the top spacer (can be seen in pic), then drill and tap it to accept the oil feed line for the turbo.

    Cheers, Murray



    '88 County Isuzu 4Bd1 Turbo Intercooled, '96 Defender 130 CC VNT
    '85 Isuzu 120 Trayback, '72 SIIA SWB Diesel Soft Top
    '56 SI Ute Cab

    Reply With Quote Reply With Quote
  9. 29th November 2008, 11:37 AM #9
    rijidij's Avatar
    rijidij
    rijidij is offline ChatterBox Subscriber
    Join Date
    Jan 2007
    Location
    SW of Geelong
    Posts
    2,383
    Total Downloaded
    0
    The missing dimension on the bottom drawing in the previous post is 40mm.

    You also need to get longer bolts when you fit the spacers. I made my spacers at 50mm thick (should've been 60mm, but I was guessing)
    I used the following............If you make your spacers to 60mm add 10mm to the following lengths..........

    10mm x 1.25 threaded H/T rod --- 1 @ 203mm (+10) 1 @ 175mm (+10) Nyloc and washer for each. I used Loctite retaining compound to hold these rods in the block.

    10mm x 1.25 H/T bolts --- 2 @ 80mm (+10) (I couldn't get 80mm so I cut 100mm bolts down)

    8mm x 1.25 H/T bolts --- 2 @ 100mm (+10)

    '88 County Isuzu 4Bd1 Turbo Intercooled, '96 Defender 130 CC VNT
    '85 Isuzu 120 Trayback, '72 SIIA SWB Diesel Soft Top
    '56 SI Ute Cab

    Reply With Quote Reply With Quote
  10. 29th November 2008, 02:29 PM #10
    EchiDna's Avatar
    EchiDna
    EchiDna is offline Wizard
    Join Date
    Jan 1970
    Location
    Singapore via Melbourne
    Posts
    1,938
    Total Downloaded
    0
    Hmm ... Murray you need a mill :P
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Clutch chatter | Alternator parts »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!