Clutch Change - advice needed.

Quote:

---

Originally Posted by Bush65

Sorry if my post created any confusion. I was replying to, and quoted Dougal.

I was specifically referring to clutches for an Isuzu truck engine and gearbox, because I knew that is what Dougal (and I) have. My Isuzu 6-speed uses the pressure plate with 29mm od x 21 spline hub (vs 25.5mm x 24 spline for Dougal's Isuzu 5 speed).

---

No problem whatsoever, I understood what you were saying. I was just clarifying the thread for anyone who may read it many moons down the track! :)

Jealous of you lucky sods with 6 speed bullet proof Isuzu boxes and 300mm clutches though! :D:D

Jon

Quote:

---

Originally Posted by D3Jon

No problem whatsoever, I understood what you were saying. I was just clarifying the thread for anyone who may read it many moons down the track! :)

Jealous of you lucky sods with 6 speed bullet proof Isuzu boxes and 300mm clutches though! :D:D

Jon

---

Bush65 is the only one lucky enough to have 6 speeds.
I've got five speeds and a smaller clutch, but I'm still happy.:cool:

I only have 4 and I am still happy!. Life is too short to be ****ty

Don't forget to check out the main bearing seal, before you start reassembly.

Quote:

---

Originally Posted by D3Jon

Was hoping to get the old girl back together this weekend, but I can't get hold of a friction plate in Perth for "love nor money", as they say. :(

Main dealer said 8 weeks, ex-UK :confused: and they can't resolve the part number of AYG34637 or AYG3463 to a modern equivalent. Said AYG numbers were Australian Army and not used anymore? No idea myself.

(Later): Well, thanks for all your help guys, I now have the correct clutch plate (AYG 3463) thanks to the extended efforts of Ian and Stuart at Rovacraft.

---

If you might be looking to "Stock up" to save problems in the future, there 2 LR Isuzu clutch kits on e-bay at the moment, this one is Pressure Plate 5312200240 + Clutch Plate AYG3616, and This one is Pressure Plate 5312200240 + Clutch Plate AYG3616 + throwout bearing. Interestingly, the seller says they suit 4 and 5 speeds, so I'd check spline count first before ordering.