Results 1 to 5 of 5

Thread: Koni Raid Vs Koni Heavy Track

  1. 4th July 2016, 05:31 PM #1
    blackrangie's Avatar
    blackrangie
    blackrangie is offline YarnMaster Subscriber
    Join Date
    May 2009
    Posts
    3,394
    Total Downloaded
    0

    Koni Raid Vs Koni Heavy Track

    Who is running the Raid and on what land rover with what spings?

    What is the bump stop feature like? Same as Heavy Track?

    How is the hydrualic rebound stop?

    Do they really have double the oil of the Heavy Track? If so remote res is not really needed?
    Reply With Quote Reply With Quote
  2. 4th July 2016, 09:45 PM #2
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    I run the raid 90's on my lse, with 270pd front and 320pd rear springs. Haven't really abused them yet. But I did have to mod my front eas mount on the diff as the shock was hitting. They are pretty big.
    I can get some measurements for you if you like.

    Guessing your shocks are now all valved wrong now that you are changing to coils?
    Reply With Quote Reply With Quote
  3. 5th July 2016, 08:17 AM #3
    blackrangie's Avatar
    blackrangie
    blackrangie is offline YarnMaster Subscriber
    Join Date
    May 2009
    Posts
    3,394
    Total Downloaded
    0

    Koni Raid Vs Koni Heavy Track

    Quote Originally Posted by Vern View Post
    I run the raid 90's on my lse, with 270pd front and 320pd rear springs. Haven't really abused them yet. But I did have to mod my front eas mount on the diff as the shock was hitting. They are pretty big.
    I can get some measurements for you if you like.

    Guessing your shocks are now all valved wrong now that you are changing to coils?
    Yes but not for long a few twists and they will be sweet, im looking at the Koni raids to see if they are a good long term option that can handle hard bumps and top outs without bump stops as an alternative to King IBP or ARB IBP..we are also moving to +2" raised front and rear shock mounts..front inside coil.
    If you can measure it would be unreal!
    Reply With Quote Reply With Quote
  4. 5th July 2016, 08:20 AM #4
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Oh ok, relocating the shock back into the coil? From memory the front eas turret is about 50mm higher than stock turrets.
    So lra used standard koni's on your eas?
    Reply With Quote Reply With Quote
  5. 5th July 2016, 01:12 PM #5
    blackrangie's Avatar
    blackrangie
    blackrangie is offline YarnMaster Subscriber
    Join Date
    May 2009
    Posts
    3,394
    Total Downloaded
    0
    Quote Originally Posted by Vern View Post
    Oh ok, relocating the shock back into the coil? From memory the front eas turret is about 50mm higher than stock turrets.
    So lra used standard koni's on your eas?
    Yes within the coil but raised 50mm..same shock koni 88 heavy track
    Reply With Quote Reply With Quote
« 3 Link Front | Chassis strengthening »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!