Results 1 to 3 of 3

Thread: Edelbrock Carb plenums

  1. #1
    Join Date
    Nov 2019
    Location
    Auckland, New Zealand
    Posts
    25

    Edelbrock Carb plenums

    Hi Guys,
    I am looking at doing away with my paper and conventional air filter housing and building something a little more off road friendly.
    If it means having to add a snorkel that's fine. Have any of you fabricated or bought an air intake plenum to fit onto a Edelbrock carb
    and if so is it possible to see your setup?
    This is my current setup, however not ideal when it comes to river crossings.

    20170704_201813.jpg

    Cheers
    Nathan

  2. #2
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    12,567
    I just had a look here http://www.realsteel.co.uk/ and they don't seem to have anything. They seem to be pretty complete with what is available. owned by an Aussie ( or used to be)

    It would be pretty easy to fabricate a plenum with a 90 degree tube bend and make up a plate based on the air cleaner flange. And then you could make the angle as you prefer etc.
    Regards PhilipA

  3. #3
    Join Date
    Nov 2019
    Location
    Auckland, New Zealand
    Posts
    25
    Yeah that was my thought too. I thought the Americans may have produced a plenum giving they sell an off road version of the same carb.
    Sometimes making is more fun than buying anyway.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!