It's too hard. :mad:
Printable View
It's too hard. :mad:
no bonnet, so mid or rear engined
Beats Me ???
This is a much better way of doing it!
I'm guessing something from the late 80s with that sharp front profile. Can't be American because it has no horrible front bumper. I agree with the mid-engine assessment. Is it a car that was in regular production?
Bugatti? Eb110?
Wifey say's try Lotus Something ??
Not a Bugatti ro a Lotus.
I wonder if these stats help...
Number of doors 2
Wheelbase 2500 mm 98.4 in
Track front1610 mm 63.4 in rear1648 mm 64.9 in
Length 4079 mm 160.6 in
Width 2000 mm 78.7 in
Height 1120 mm 44.1 in
Length:wheelbase ratio 1.63
Kerb weight 1107 kg 2441 lb
Drag coefficient 0.342
Frontal area 2.04 m2 Cx 0.70
Bore × stroke 81.00 mm × 86.40 mm 3.19 in × 3.4 in
Cylinders V8
Displacement 3.6 litre 3562 cc (217.367 cu in)
Type DOHC Double overhead camshaft
4 valves per cylinder
Compression ratio 9.30:1
Maximum power 454.2 PS (448 bhp) (334.1 kW) @ 6500 rpm
Specific output 125.8 bhp/litre 2.06 bhp/cu in
Maximum torque 529.0 Nm (390 ft·lb) (53.9 kgm) @ 4000 rpm
Specific torque 148.51 Nm/litre
0-60 mph 4.30 s
Top speed 299 km/h (186 mph)
Fuel consumption - heaps
CO2 Emissions - mega lots
Power-to-weight 404.7 bhp/ton
Engine location Mid Engine
Drive Rear wheel drive
etc etc etc
Ok so some sources say late 80s some late 90s, take your pick.
Definitely not American.
Probably a one-off. Makes it a bit difficult I agree.
Half the info on the internet disgrees with the other half (like most thigs I suppose! )
If no one get it opr has a decent guess oon I sall post a pic of teh whole car but tha WILL give it away.
Last Guess F40
But then thats not a one off
It is a Ferrari but I could not tell you the model. Real Fazazz are V12 and front engined.