LLAMS electronic height controller for D3/D4/RRS

Quote:

---

Originally Posted by Graeme

Weakestlink,
I can swap the loom. There have been some problems with some of the sockets in the grey connector that plugs into the ecu, although I seem to catch most. That connector needs to be fully and evenly pressed home as even slightly back on 1 end can cause problems.

---

Thanks Graeme. I will hold off sending the loom back. I have found a fault in a connector on the OME loom. Found one of the other plugs being slightly out giving errors occasional susspension errors. I checked the lot and everything is now working. Given the fault with out the LLAMS loom installed I assume the LLAMS loom is fine and the fault was me slightly knock off line one of the pugs I had not meant to touch!!! Whoops and sorry! I will reinstall the LLAMS loom again when I get back from my trip.:D
Thanks again Rich for the intall guides.

I am due to pick up my new ride Friday arvo, hoping to hear back regarding payment options and price etc. Hope to have this same day as the car. :D

Hi Adzee,
You might want to phone as sometimes it seems that emails take a while to be read.

I'm not a subscriber to Disco3 and having already stretched their advertising rules somewhat, I didn't want to become unwelcome by telling you outright from where the Llams could be purchased.

This is a link that might be useful; a phone call would seem better however.

Llams PTY LTD

Quote:

---

Originally Posted by Graeme

Hi Adzee,
You might want to phone as sometimes it seems that emails take a while to be read.

I'm not a subscriber to Disco3 and having already stretched their advertising rules somewhat, I didn't want to become unwelcome by telling you outright from where the Llams could be purchased.

---

All good mate! I have now begun the epic task of trawling both forums to absorb as much as possible. Realistically how long do you think this will take to install?

Several people have fitted the module and done the calibration within 30 mins. Fitting the switch will probably take another hour or so if its to be fitted to the panel behind the park brake switch. If the switch is fitted to the left steering wheel cover, it will take a lot less time. The LED is generally not visible when mounted on the steering wheel cover but this doesn't seem to be a concern to those who have mounted it there. One soon gets used to the different stance and handing of lower or higher than normal - I do mostly but not today driving at +30 at low speed including through round-a-bouts. I noticed it when I got out though, then remembered reversing out of an angled driveway.

Turns out I will be picking it up tomorrow! :D:D:D

Cannot wait, and if I get the Llams tomorrow I know what I'll be doing at 3am. hehehe

Quote:

---

Originally Posted by adzee

Turns out I will be picking it up tomorrow! :D:D:D

Cannot wait, and if I get the Llams tomorrow I know what I'll be doing at 3am. hehehe

---

I ordered mine on Fri. Or was it Thursday. It it goes express post I might get it on tomorrow. Woohoo.

Quote:

---

Originally Posted by disco_driver

I ordered mine on Fri. Or was it Thursday. It it goes express post I might get it on tomorrow. Woohoo.

---

Did you just pick that Disco up? I think I saw it on carsales...

I hope I can fit mine on Wednesday night. After this weekend I know its sooo going to be worth it!

Quote:

---

Originally Posted by adzee

Did you just pick that Disco up? I think I saw it on carsales...

I hope I can fit mine on Wednesday night. After this weekend I know its sooo going to be worth it!

---

Yes got the car about a week ok. Going great so far. Love the way it drives. Big difference to my old 60 series cruiser.

I miss the height though so hence the llams system. Can't wait.