DISCOVERY 2 STEEL REAR BARS!!

Quote:

---

Originally Posted by FireFox

im deffinatel;y interested in a D1 rear bar.

---

+1 for the D1 bar

HI CHAPS
I am looking for a rear bar for my disco 2 with jerry holders. Any clues on where and what.
Regards
Ross

did you ever get a bar made for the D1 hendrik? seems you have more interest in this trhead for D1's than D2's

PM sent

Quote:

---

Originally Posted by dullbird

did you ever get a bar made for the D1 hendrik? seems you have more interest in this trhead for D1's than D2's

---

Yep another interested in the D1 bar, or should i say my wife is as it is her car ;).

Any further news on rear bars with spare and /or jerry carriers to suit Disco 2

Quote:

---

Originally Posted by Hendrik

Hi Murray

The clearance you indicate would be ideal, however the problem is the tail light inside the bar, I guess I could let the bar sit out a bit more and then there should be enough clearance to fit the hub inside the bar.

The bar should be strong enough to hold two wheels, if not I can always go to a 4mm wall. I have limited experience with wheel carriers, but I was going to try to simplify it a little. My question to you is whether it is really necessary to have a hub and bearing set up. Wouldn't a hub with a nylon bush be able to take the weight of the wheel and still provide sufficient smooth movement of the carrier?

I will keep your kits in mind, as they are very well designed and you have a good reputation and who knows I can always get wheel carrier kits from you and adapt them on my bar....it will save me a lot in labour time.

---

Hendrik. PM sent a couple of weeks ago - did you get it?

Hi guys
Sorry I have been flat out lately, so haven't been able to take any orders. I do have some time off coming up so will be able to take some orders. And I have replied to the millions of PM's I've been getting.

Old thread but in case any of you are still bashing these out... Mine is a D2 V8 2001, Sydney-based, and could be tempted to invest in one of these if anyone here is interested. Pls pm me.

Any insurance/legality issues on these sort of things to be aware of?

ta,

D

Quote:

---

Originally Posted by Shylock

Any insurance/legality issues on these sort of things to be aware of?

---

Insurance wise it's entirely up to you if you tell them or not, as it's not a modification it's highly unlikely they'll refuse you a claim based on it, they just won't give you any money if you don't list it and it's damaged.
Legality, should be similar to the above, it's not replacing any safety type component, and it's not got giant metal spikes welded to the sides so you should be fine :)