Results 1 to 5 of 5

Thread: LLAMS for L462 Discovery (D5)

  1. #1
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0

    LLAMS for L462 Discovery (D5)

    LLAMS has been demonstrated to work in the new Discovery. However kits wont generally be available just yet, waiting for confirmation of availability and lead-time of a short brake controller extension loom from which to source permanent power. Last week my loom supplier accepted the challenge after I supplied them with the plug and socket part numbers.

    Whilst it was anticipated that a separate power wire would be required due to no provision for CVDs in this vehicle (CVD section power for L494, L405 and the L560 Velar is in one of the connectors intercepted whereas the suspension section's power isn't), running a wire to the nearest fuse panel is not as simple as hoped. Therefore power will be taken from the nearby trailer brake controller socket, hopefully using a short extension loom to allow a brake controller to be fitted as well as LLAMS. Once confirmed that the leads will be available, kits will be available for anyone not wanting to wait using an interim bullet connector wire fitted to the trailer brake controller socket power pin then the extension lead forwarded when available. Note that in the interim, LLAMS and a brake controller are mutually exclusive so the loop-back plug needs to be used whilst a brake controller is fitted unless a person was to make their own LLAMS power connection to the brake controller lead. The LLAMS power lead is fitted with an inline 5A fuse.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  2. #2
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,051
    Total Downloaded
    0
    Good work, could be the first accessory available for the D5 .
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  3. #3
    Join Date
    Oct 2003
    Location
    Montrose, Vic.
    Posts
    5,418
    Total Downloaded
    0
    I'm not about to run out and buy a D5.... but since I first bought Llams, I have said it would the first accessory I would buy for any air suspended Land Rover.... great to hear of the progress Graeme.
    Mark

    Of all the things I've lost, I miss my mind the most

    2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
    2012 SDV6 SE D4 with some stuff... gone...
    2003 D2a TD5...gone...
    2000 D2 V8...gone...
    https://bymark.photography


  4. #4
    Join Date
    Nov 2016
    Location
    Eltham, Victoria
    Posts
    181
    Total Downloaded
    0
    Watching with keen interest but won't be getting this side of Christmas. I have a friend who might be interested as well.

  5. #5
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    Here's a picture of OR2+Llams high when high is configured as OR2 height (+75mm, not the default +60mm).

    Full OR2 + LLAMS +75.jpg
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!