Warren and Brown for me, however its been rebranded as Sidchrome. Atleast it was made here!
Printable View
Warren and Brown for me, however its been rebranded as Sidchrome. Atleast it was made here!
The biggest question is what size. I agree that Warren Brown are great.
However you don't just have one.
Depending on the application, you may need 2 or 3 sizes.
Rocker cover on a Td5, 9nm, barely finger tight or 737 main landing gear trunion 800nm.
Will
Digital balance on the end of a spanner.
Or Norbar.
You don't need a tension wrench for rocker cover bolts.Quote:
Originally Posted by Will Wallace
In 40 odd years I have only ever used one for head bolts, big ends an main bearings and there might have been the odd other thing that I can't remember.
Yep, the one in my tool box was purchased new in the mid sixties by dadQuote:
Originally Posted by p38arover
warren and brown for me as well. Aussie built aren't they?
Thanks Dave.
Will.
They were and still could be but don't know. It would be nice if they still are.Quote:
Originally Posted by DanDisco2
I have two Ritch tension wrenches - one that is rarely used. I try to keep it as a check. I also have a cheap aldi one and an old inch/lb tension wrench that is of unknown vintage.
The two ritch seem to still be in calibration with each other even though one has been used much more than the other
Tom.
Park tool make cheap deflecting beam ones for 1/4 and 3/8 drive useful for carbon and plastic. Kingchrome 1/2 drive clicker from bunnings is great value at $90 from memory.