Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 50

Thread: Hoist advice

  1. #11
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,791
    Total Downloaded
    0
    The slab is vital. You don't want a Deefer ( or an OKA! ) on your head.

    Also, when we were shopping for my son's Tuffit we looked at second hand. Nearly all were 3 phase. Do you have that? I don't recall exactly, but his two poster was maybe $3.5K new a year ago, and it lifts his laden GU wagon effortlessly. He installed it himself using their specs and instructions fairly easily.
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  2. #12
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,160
    Total Downloaded
    0
    The hoist that Scouse has is interesting. It's a 4-poster on wheels. He can move it around in his shed. It will carry a P38A (his) or an L322 (mine) - he's had them on the hoist.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  3. #13
    Join Date
    Sep 2014
    Location
    Hunter Valley NSW Australia
    Posts
    144
    Total Downloaded
    0
    When I bought mine Tufflift were the only ones that had a 6 tonne 4 poster with single phase, had all sorts of comments from other brands of single phase aren't made, too slow etc, at home it doesn't matter how long it takes it's still faster than a jack.
    Having rolling jack beams on a 4 poster makes all sorts of jobs easier, can lift the entire vehicle off the hoist to do wheel rotations, remove complete axle and diff assemblies, suspension work etc.
    I removed the front end completely with the Oka sitting on large stands under the chassis the engine and trans could be dropped on a rolling beam and then slid onto a lift table and lowered to the floor then rolled out from under the hoist and vehicle. Replacement is then a reverse procedure.
    A two poster would be ideal for a Landrover body lift, don't think I would like to have 6 tonne on a two poster though especially as heavier vehicles tend to be longer.

  4. #14
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0

    Hoist advice

    Thanks everyone for the very useful advice. It’s great to benefit from actual experience.

    I think a 2 post 4 tonne hoist will be enough. I cant see me lifting anything bigger than 2.5 tonne. I dont have any power to the shed yet, that’s another job. I will be fitting a 15 amp point but would prob prefer to keep it at single phase.

    Ive seen that many used hoists are 3 phase power.

    The concreter made provision for a two post hoist when pouring the shed slab.

    Im looking at Tufflift and Aussie car lift sites. They look quite similar. What’s the advantage/disadvantage of base plate vs overhead plate?
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  5. #15
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,791
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    Thanks everyone for the very useful advice. It’s great to benefit from actual experience.

    I think a 2 post 4 tonne hoist will be enough. I cant see me lifting anything bigger than 2.5 tonne. I dont have any power to the shed yet, that’s another job. I will be fitting a 15 amp point but would prob prefer to keep it at single phase.

    Ive seen that many used hoists are 3 phase power.

    The concreter made provision for a two post hoist when pouring the shed slab.
    On the subject of power points: get more than you think you'll need. Costs a bit more but is way cheaper than adding them later. 15 amp is good, but consider at least one 32 amp. I bought my son a good MIG welder from BOC. It has a 15 amp plug fitted, but it turns out that was fro "demo" purposes. It needs 32 to run its duty cycle.

    Splurge on good lights as well. Better to do it now during the build, if you can stretch the budget, cos you won't later. LED Highbay are pretty good.

    Also, consider painting the floor. Doesn't sound like much, but it makes a huge difference for keeping it clean from oil spills, and the reflected light is really worth it.

    Before and after:
    IMG_3111.jpgIMG_3114.jpg
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  6. #16
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,791
    Total Downloaded
    0
    Quote Originally Posted by oka374 View Post
    When I bought mine Tufflift were the only ones that had a 6 tonne 4 poster with single phase, had all sorts of comments from other brands of single phase aren't made, too slow etc, at home it doesn't matter how long it takes it's still faster than a jack.
    Having rolling jack beams on a 4 poster makes all sorts of jobs easier, can lift the entire vehicle off the hoist to do wheel rotations, remove complete axle and diff assemblies, suspension work etc.
    I removed the front end completely with the Oka sitting on large stands under the chassis the engine and trans could be dropped on a rolling beam and then slid onto a lift table and lowered to the floor then rolled out from under the hoist and vehicle. Replacement is then a reverse procedure.
    A two poster would be ideal for a Landrover body lift, don't think I would like to have 6 tonne on a two poster though especially as heavier vehicles tend to be longer.
    I want to bring #74 to your place!
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  7. #17
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,160
    Total Downloaded
    0
    Quote Originally Posted by p38arover View Post
    The hoist that Scouse has is interesting. It's a 4-poster on wheels. He can move it around in his shed. It will carry a P38A (his) or an L322 (mine) - he's had them on the hoist.
    I forgot to say this also has rolling jack beams so one can lift the front and/or rear to do wheel changes, brakes, etc.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  8. #18
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,779
    Total Downloaded
    0
    Quote Originally Posted by Tins View Post
    On the subject of power points: get more than you think you'll need. Costs a bit more but is way cheaper than adding them later. 15 amp is good, but consider at least one 32 amp. I bought my son a good MIG welder from BOC. It has a 15 amp plug fitted, but it turns out that was fro "demo" purposes. It needs 32 to run its duty cycle.

    Splurge on good lights as well. Better to do it now during the build, if you can stretch the budget, cos you won't later. LED Highbay are pretty good.

    Also, consider painting the floor. Doesn't sound like much, but it makes a huge difference for keeping it clean from oil spills, and the reflected light is really worth it.

    Before and after:
    IMG_3111.jpgIMG_3114.jpg
    Thanks Tins, what paint did you use?
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  9. #19
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,791
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    Thanks Tins, what paint did you use?
    Dulux Avista semi. There are others, it's what they had. It doesn't seem to chip if you drop something on it.
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  10. #20
    Join Date
    Sep 2014
    Location
    Hunter Valley NSW Australia
    Posts
    144
    Total Downloaded
    0
    If you want to be a real cheapskate with painting the floor good old cheap water based wooden fence paint works well.
    We painted a shed floor with it about 13 years ago and it's still holding up well.
    A few years ago son had a brand new house and wanted to paint the double garage floor, as with most new homeowners funds were tight so I suggested fence paint, it's no longer as cheap as it once was and a bit harder to find but we did two coats over a couple of days and it still is holding up well.
    We washed the floor down and allowed it to dry before the first coat to remove all the construction dust and spills and then the two coats were applied 24 hours apart, it was summer and it dried quickly.
    The first coat soaks into the concrete really well and the second and or third gives the finish, just applied with a brush around the edges and roller the rest.

Page 2 of 5 FirstFirst 1234 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!