67kg's,, :o
you'd have to buy two to keep the vehicle level!
Printable View
67kg's,, :o
you'd have to buy two to keep the vehicle level!
I think i have pretty much decided that the other jerry can holder will go so that i can have a similar setup to Baz's camper with the battery box at the front and gas bottle at the rear.
That will allow more space for another battery and not skimp on space for the gas bottle, i will mount the jerry holders to the sides of the storage box on the draw bar.
Looking at gas bottle rings and it seems there are 4.5kg and 9kg, thing is there are no 4.5kg bottles ? There are 4kg with POL fitting or 4kg with 3/8 fitting which is actually a 3.7KG bottle :confused:.
I have a spare over center latch so i think i will just make my own.
Done, a quick trip to the green shed for 1m of steel and jobs done.
https://www.aulro.com/afvb/images/im...015/09/201.jpg
https://www.aulro.com/afvb/images/im...015/09/202.jpg
Turned out better than i expected, bending the steel around an empty cylinder helped keep the right shape.
So, this all going to be ready for the weekend Nick?
Not as i had planned but workable.
Sent from my GT-I9300 using AULRO mobile app
Gas bottle holder done and mounted, will finish it off and paint it the next free weekend.
https://www.aulro.com/afvb/images/im...2015/09/73.jpg
https://www.aulro.com/afvb/images/im...2015/09/74.jpg
99% of the movement on those bottles will be upwards,,
just saying,,:angel:;)
Its clamped in there, its not going anywhere.Quote:
Originally Posted by Pedro_The_Swift
That is why they put the clamp above the weld in the centre of the bottle, just like Nick has done. No chance of it jumping out.Quote:
Originally Posted by Pedro_The_Swift