Page 1 of 7 123 ... LastLast
Results 1 to 10 of 63

Thread: Reversing Camera to D4 with touch Screen

  1. 7th May 2012, 01:30 PM #1
    discotwinturbo's Avatar
    discotwinturbo
    discotwinturbo is offline Wizard
    Join Date
    May 2011
    Location
    Orange Grove WA
    Posts
    1,274
    Total Downloaded
    0

    Reversing Camera to D4 with touch Screen

    I have contacted HIDS4U in the UK about their GVIF so that I can use the touch screen as a reversing camera viewing screen.

    This has been the reply.

    ""Hi Brett
    I have been checking for you and we are 95% certain if you have the touch screen then you can add a camera using the gvif
    Br
    Ian""

    95% certain is pretty good. This guy certainly knows his stuff from what I read on the D4 UK Forum.

    Has anyone fitted this the a D4 with a touch screen ? My D4 is classed as 2012, but I picked in up new in 2011 December. It has a colour touch screen.

    I have found on the forum a fair bit of info about the GVIF and fitting instructions, but nothing for the D4 with the touch screen.

    I am tired of having the extra monitor sitting against the front window to watch what is going on at the rear......a minor gripe but would be nice to have it more factory looking.

    Brett.....
    Reply With Quote Reply With Quote
  2. 7th May 2012, 06:11 PM #2
    Lotz-A-Landies's Avatar
    Lotz-A-Landies
    Lotz-A-Landies is offline Super Moderator Gold Subscriber
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Quote Originally Posted by discotwinturbo View Post
    I have contacted HIDS4U in the UK about their GVIF so that I can use the touch screen as a reversing camera viewing screen.

    This has been the reply.

    ""Hi Brett
    I have been checking for you and we are 95% certain if you have the touch screen then you can add a camera using the gvif
    Br
    Ian""

    95% certain is pretty good. This guy certainly knows his stuff from what I read on the D4 UK Forum.

    ...
    Hi Brett

    If the lifeguard at the beach said that you had a 1:20 chance of being eaten by a shark if you went in the water, would you go swiming?

    The questions therefore are:
    • what is the cost, shipping and installation of their GVIF?
    • If it doesn't work what do I do?
    • Will it void my LR warranty?
    • How much do I want it?

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
    Reply With Quote Reply With Quote
  3. 7th May 2012, 06:51 PM #3
    CaverD3
    CaverD3 is offline ChatterBox
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Quote Originally Posted by Lotz-A-Landies View Post
    [*]what is the cost, shipping and installation of their GVIF?
    They are quite pricey but you can do a lot more than just a camera, you can add digital TV and other AV inputs.

    Quote Originally Posted by Lotz-A-Landies View Post
    [*]If it doesn't work what do I do?
    Ask if you can return it if it doen't work. I think they mean it works on D4s but has not been tested on an MY2011. Do a search on DISCO4.COM - Index.

    Quote Originally Posted by Lotz-A-Landies View Post
    [*]Will it void my LR warranty?
    No it won't. The manufacturer only had the right to refuse the warrnty claim if the device has actually caused the failure.

    Quote Originally Posted by Lotz-A-Landies;1678441[*
    How much do I want it?[/LIST]
    PICNIC?
    Reply With Quote Reply With Quote
  4. 7th May 2012, 07:14 PM #4
    Lotz-A-Landies's Avatar
    Lotz-A-Landies
    Lotz-A-Landies is offline Super Moderator Gold Subscriber
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    So for $400, why wouldn't you try this device for your reversing camera?

    Advanced ICE Pty Ltd - Land Rover From 2012 VIM for Retrofit Camera or Nav



    It comes from an Aussie vendor so warranty etc apply.

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
    Reply With Quote Reply With Quote
  5. 7th May 2012, 08:53 PM #5
    discotwinturbo's Avatar
    discotwinturbo
    discotwinturbo is offline Wizard
    Join Date
    May 2011
    Location
    Orange Grove WA
    Posts
    1,274
    Total Downloaded
    0
    Quote Originally Posted by Lotz-A-Landies
    So for $400, why wouldn't you try this device for your reversing camera?

    Advanced ICE Pty Ltd - Land Rover From 2012 VIM for Retrofit Camera or Nav

    It comes from an Aussie vendor so warranty etc apply.
    I have contacted these guys....they are waiting for someone in QLD to drop a D4 with a touch screen in to test....they don't know if it will work until they test it.
    I put a call out a month ago for a QLDer to drop in....but no replies.
    I would support this one, if it was confirmed.
    Brett...
    Reply With Quote Reply With Quote
  6. 7th May 2012, 09:02 PM #6
    Lotz-A-Landies's Avatar
    Lotz-A-Landies
    Lotz-A-Landies is offline Super Moderator Gold Subscriber
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    I'm guessing it will be you or I who have to drive up to Brissy to check, it would be more risky buying the one from the UK.

    This evening I sent an email to Graeme Cooper Automotive asking them to check the Advanced ICE item. We may go ahead and get one in and see what happens, if it works they may become an agent in Sydney, if it doesn't everyone will know.

    Will talk to them tomorrow.

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
    Reply With Quote Reply With Quote
  7. 7th May 2012, 09:11 PM #7
    kenl
    kenl is offline Master Supporter
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    I've fitted a cheap camera to my 2011 touch screen, I think it was less than $40 on the bay and needs to be activated using a faultmate or similar, it also has to be a NTSC camera. The 2010/11 touch screens have a 6 pin plug in the back, the middle 2 are for the reversing camera the other 4 are for venture cam and TV inputs.
    Reply With Quote Reply With Quote
  8. 7th May 2012, 09:19 PM #8
    discotwinturbo's Avatar
    discotwinturbo
    discotwinturbo is offline Wizard
    Join Date
    May 2011
    Location
    Orange Grove WA
    Posts
    1,274
    Total Downloaded
    0
    Quote Originally Posted by Lotz-A-Landies
    I'm guessing it will be you or I who have to drive up to Brissy to check, it would be more risky buying the one from the UK.

    This evening I sent an email to Graeme Cooper Automotive asking them to check the Advanced ICE item. We may go ahead and get one in and see what happens, if it works they may become an agent in Sydney, if it doesn't everyone will know.

    Will talk to them tomorrow.
    The fuel for me to get there.....probably about 1000....would be cheaper for me to run the gauntlet.

    I am in WA ;-)

    Let's see what cooper automotive have to say....fingers crossed it works.

    Brett....
    Reply With Quote Reply With Quote
  9. 7th May 2012, 09:20 PM #9
    discotwinturbo's Avatar
    discotwinturbo
    discotwinturbo is offline Wizard
    Join Date
    May 2011
    Location
    Orange Grove WA
    Posts
    1,274
    Total Downloaded
    0
    Quote Originally Posted by kenl
    I've fitted a cheap camera to my 2011 touch screen, I think it was less than $40 on the bay and needs to be activated using a faultmate or similar, it also has to be a NTSC camera. The 2010/11 touch screens have a 6 pin plug in the back, the middle 2 are for the reversing camera the other 4 are for venture cam and TV inputs.
    How much does a faultmate cost ?

    Brett...
    Reply With Quote Reply With Quote
  10. 7th May 2012, 09:51 PM #10
    kenl
    kenl is offline Master Supporter
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    MY fault mate cost about $1100 from memory but most including myself buy the cheap license that is locked to your car vin but can transfered if you get a new one or sell the faultmate. Google "black box solutions" and you'll find it. The lic for multi vehicles is about 3? times the price in each model ie d2 d3 d4 FFRR

    They are not the best mob to get on with as they think everyone who is not completely computer techy is a fool, but I've found this with a lot smaller tech companies and there is plenty of other help out there. I think the biggest hurdles I had was buying a TOP end usb to serial connection and running the program as an admin in windows 7... BBS still recomend XP I think?

    I've also changed my headlight setting to be on whenever the car is in gear (daytime driving light) adjusted the auto wiper sensitivity, turned off 3 flash indicators (I don't like them) get the car to beep when I double lock it, installed cornering globes and then activated them..... etc

    The plug you are looking for on the back of your screen looks like the photo (I hope this works) and is courtesy of Wiggs on the disco 3 site
    Attached Images Attached Images
    Reply With Quote Reply With Quote
Page 1 of 7 123 ... LastLast
« I'd like to understand the D4 tranny?? | Which thread to put trip photo's in ??? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!