Thread: D3 D4 rear fitouts

Mine was done by Drifta and is similar to Jon and others. However, I got them to add a storage box that mounts to the fridge slide via 4 screws and captive nuts in the slide. This creates useful storage for when the fridge is in the camper trailer or just not required for a trip. I'm going to add handles to the box.

The unit also includes a slide-out shelf that converts to a free-standing camping table. When you slide it partially out, it's handy for when packing/unpacking the fridge.

There is room behind for tent and other things when 2nd row seats are raised but I will be adding tie-down points to attach things when 2nd row seats are lowered flat, e.g. extra water.

I also like that the top drawer can be opened without lowering tailgate.

P1040011 copy.jpg P1040019 copy.jpg P1040012 copy.jpg P1040014 copy.jpg P1040020 copy.jpg

Cheers,
Scott

That's a good looking set-up Scott. Have been considering Drifta myself - though will probably not go that way now, as I am about to have by old BOAB set that's in the young bloke's D2 come available when he sells the Disco and replaces it with an Amorok.

A couple of small alterations to the BOAB set-up and it should do what I need in the D4.

I saw a photo somewhere of a stove bracket that hung off a RW Carrier.
Decided it was a great idea meaning I would not need to move the stove to either get into my drawers.

Simply made of 12mm ply and folds up flat:



Tailgate can be closed with the stove left in position, fridge fully extends out and drawers slide out under too.



A clamp holds it in place, the ply cantilevers out with a support under.
Slots in the ply stop to stove moving. Simple.