- 
	
		
                        
                                
                                        
                                                20th April 2012, 02:49 AM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
		
			Auto Conversion
		
		
				
					
					
				
				
		
			
				
					Hi, Some of the UK members here will know that I, with a little help from friends, have converted my manual TD5 D2 into an Automatic! 
Couldn't bring myself to sell it and buy an auto.......
so.....some shopping was needed
Second Hand sourced parts.....
Low milage TD5 auto box. 
Torque converter
Auto Flyweel
Flex Plate Carrier
Trans Tunnel trim
Trans tunnel wood
auto selector and cable
XYZ Switch
Oil cooler
Main Wiring Harness
Auto Pedal Box
(poss auto master cylinder, or at least brake fluid reservoir)
Gearbox wiring loom and ECU
Engine ECU
New Parts
Rear Crank Oil Seal. 
Crank Bolts
Flex Plate
Cooler pipes
Torque converter bolts
auto filter kit and seal
10 ltrs atf
auto box output seal
trans box input seal
2ltr trans box oil
engine oil
trans cooler sensor
trans tunnel top plate and foam seal
trans box intermediate shaft seals
				
			 
			
		 
			
				
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                20th April 2012, 02:54 AM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					I had to change the main wiring loom as my car didn't have the wiring for the gearbox ecu etc......
With help from Urban Panzer and friends a LOT of the car then came apart! 



And then the interior! 

and then the heater box! 

all out......

now time to put this one in......
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                20th April 2012, 02:55 AM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Time to get the box out......
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                20th April 2012, 04:22 PM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Original Clutch and flywheel were knackered! 


[ame=http://www.youtube.com/watch?v=Kimo8_4Tuss]Td5 dual mass flywheel play/wear - YouTube[/ame]
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                20th April 2012, 04:26 PM
                                        
                                
                                
                                        
                                                #5
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Manual Dual mass removed and solid auto flywheel and flexplate installed

Gearbox in ........

Followed by all the other bits......
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                20th April 2012, 04:56 PM
                                        
                                
                                
                                        
                                                #6
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					I have done the conversion from td5 auto to manual, partner didnt like the manual and had to put it back to auto....
 
Its all fun and games....
 
Have fun...
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                28th April 2012, 10:05 PM
                                        
                                
                                
                                        
                                                #7
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Been running it for a couple of weeks now
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                28th April 2012, 11:15 PM
                                        
                                
                                
                                        
                                                #8
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					I really like those alloys on your vehicle Monkiefone, whats the name/ style of them I assume they are LR originals?
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                29th April 2012, 02:08 AM
                                        
                                
                                
                                        
                                                #9
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Thanks. 
The wheels are from an Adventurer. A Discovery special addition.
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                27th May 2012, 09:20 AM
                                        
                                
                                
                                        
                                                #10
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
					
				
		
			
				
					Hi there. why did you do the swap? I have to make a decision right now whether to buy manual or auto and am leaning towards manual. Am interested in your thoughts on this topic. Thanks
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
		
		
		
	
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				
				Posting Permissions
			
			
				
	
		- You may not post new threads
 
		- You may not post replies
 
		- You may not post attachments
 
		- You may not edit your posts
 
		-  
 
	
	
	Forum Rules
 
			 
		 
	 
 
  
    Search AULRO.com ONLY! 
 | 
    Search All the Web! 
 | 
  
  
  
  
Bookmarks