Page 27 of 69 FirstFirst ... 17252627282937 ... LastLast
Results 261 to 270 of 684

Thread: Stuee's 101 Rebuild

  1. #261
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    1,180
    Total Downloaded
    0
    Spent some time on the 101 today. Have been working towards getting the battery box ready to mount the electrics.

    Work area:


    Re-cutting thread in freshly (last year or year before fresh) galvanised frames:


    What happens when you combine battery acid, aluminium panels, steel battery tray and steel frame:





    Wheel arch panel prior to riveting on:


    Roughly planning out layout:



    Have chosen the second option for the time being. At present I am going for an N70ZZ size battery. In the second shot above the cotton bud marks out how long it is in the battery tray.

    Have been looking at supercharge as I've had a good run with them. The classic model has a 2 year warranty but I'd like a maintenance free model which looks to be the MF95D31L/R. I'm looking at the sealed maintenance free models as theres less likelihood of them spilling acid everywhere. This model has 760CCA vs 660CCA which isn't really an issue with the low compression 3.5 so may even be able to get a smaller battery.

    Continuing on, new base plate for the battery box. This will allow me to mount all the electrical items up and still get it all properly painted.


    edit**

    Frame and panel mounted:


    Its surprising how solid it comes up when all fixed together.

  2. #262
    Join Date
    Dec 2010
    Location
    South Scotland
    Posts
    475
    Total Downloaded
    0
    Very shiney, and looks in a lot better state than my project 101 at the moment.

  3. #263
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    Stuee do you want dual batteries for running a fridge or camp lights ????.
    I would plan for dual batteries in the standard battery compartment.
    The slightly smaller size batteries needed still start the motor very well singlely.
    I use two very simple and cheap to purchase battery switches behind the passengers seat to switch on or off any battery, they are compact too.
    In the battery compatment I have a fuseable link which supplys power to the main fuse panel on the side of the radiator tunnel at the extremely front of the vehicle inside the cabin.
    I can post pics if you want too.
    Another thing worth thinking about is jump starting the 101 or other vehicles with the 101.
    Access to the batteries for battery charging if you use the 101 non frequently is another thing to think about.
    On my 101 I have a 175 amp anderson plug at the rear chassis X member near the tow hook and it has heavy battery cable correctly secured running to the battery isolation switches.
    I carry a special jump starter lead with a anderson plug on it.
    The anderson plug on the 101 is also used for running any camper trailer electrics if needed and small battery charger clips will attach stiaight on to the anderson plug and this saves climbing up into the cabin and removing the top off the battery box.
    The battery box is also a easy spot electrically to fit some cigar lighter/power plugs which can be for use in the cabin or cargo area depending which way you want to face or fit them
    Ron

  4. #264
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    1,180
    Total Downloaded
    0
    I had thought about dual batteries but disregarded them for a few reasons. First being I really wanted to put the electrics in the battery box with the battery, mounting two batteries uses up just a bit too much real estate (which just rules out putting the second battery in that location). Secondly, I had a dual battery on my discovery but rarely used it. I just didn't get out fishing and camping enough to justify the setup (hopefully that will change with the 101!).

    I have had good experiences with power-packs though. Being portable means they are handy to jump start any car (without having to pull the 101 out of hibernation), can be moved around the camp site, and aren't vehicle specific. When I first got the disco when I went camping I just borrowed my dads Waeco branded power pack and that ran the fridge fine as well as having juice to jump start if needed. I'll be looking at either an Ark Power pack or DIY my own battery box.

    Ill definitely be running heavy duty cable to the rear of the 101 along with a anderson plug like yourself at some point. The future FIL has a similar setup on his jeep for powering his trailer but also an anderson plug inside which acts as a quick connect to his "modified" Ark power pack with built in Red Arc controller. Quite a convenient setup and when not in use the battery can just stay on a maintenance charge in the shed until its needed next.

  5. #265
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    Here are some pics ........might help you with different ideas.
    this a extra cover which hides the fuses on the passengers side of the fan tunnel


    This is the anderson plug at rear

    Same set up on my studebaker, getting the battery trickle charged

  6. #266
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    1,180
    Total Downloaded
    0
    Thanks Ron. Do you happen to have any pics of your battery box? I'd be keen to see the dual battery setup. Starting to make me think about it more.

    I had toyed with the idea of using the spare wheel space to mount the power pack but I'll wait till I have my final tyres and see if it is still a feasible to even mount the spare there.

  7. #267
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    This shows the Two $12 dollar compact battery switch with removable key hidden just out of sight behind the passengers seat.
    They take up very little room inside the battery box.


  8. #268
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    My 101 as I got it had the second battery mounted just in front of the LHS rear wheel and used this as a battery box.
    Note the cut out for the winch cable when running it rearwards.

    There is now a tool box fitted in the same place and the extra battery is fitted as per standard 24volt system in the battery box, but the system is 12 volt.

  9. #269
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    I have taken some fresh pics for you today.
    First one is looking towards the engine cover.
    I do have some extra wiring and stuff fitted inside the battery box


    This is looking overhead on the same batttery.
    note the lead running from the cig lighter socket.
    There is also a european type power outlet near the extingisher too.

  10. #270
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0

    the next 2 pics shows I still have pently of room around the other battery mounted on the passenger side of the battery box.


Page 27 of 69 FirstFirst ... 17252627282937 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!