Printable View
https://www.aulro.com/afvb/images/im...14/01/1186.jpg
https://www.aulro.com/afvb/images/im...14/01/1187.jpg
https://www.aulro.com/afvb/images/im...14/01/1188.jpg
https://www.aulro.com/afvb/images/im...14/01/1189.jpg
Taken in the dark under flash so I don't know what I was pointing at .
First time I have lifted the engine cover in 12 months....I have some work in cleaning and degreasing.
More to come.
Ok, after a little hunting found a pic from an Ebay advert that has expired. Complete 101 Ambo Compressor kit sold for £15 in July!!!!!! Someone did well!! Anyhow, here's a pic of the unit and the bracket... Not very clear as I had to zoom onto the little pics as the big ones had also expired. I think you'll have better luck with Ron's detailed pics! I was also a bit slow.. I have here the other type of AC pump which I sourced to do what you are doing, but no longer need as the Cummins has air already! Another Doh!! Should have thrown it on Micks trailer!
https://www.aulro.com/afvb/images/im...14/01/1178.jpg
https://www.aulro.com/afvb/images/im...14/01/1179.jpg
https://www.aulro.com/afvb/images/im...14/01/1180.jpg
https://www.aulro.com/afvb/images/im...14/01/1181.jpg
that's it.........hope it helps.
my compressor came from a Toyota 18RC motor which are now hard to find.
In the first picture above you can see alittle flat spot in the side of the compressers crank case, that is the spot to fit a filler plug and dip stick.
My dip stick and filler will not show up in the pics as I fitted it on the wrong side under the Dexion bracket making it a little bit hard to reach.
Found a pic of one in situe on the 101 forum!! funny thing is its owned by a guy in South Gippsland who goes by the name of 101FC on that forum..... Ya gotta love the net!! :D
That helps a lot - thanks heaps. I have a heap of brackets and an idler pulley off the old 3.5 - I'll have a look through them tomorrow and see what I can come up with .:)
Simon - that Ambo compressor is as tall as mine, just a but thinner - I'd be interested to see where they mount from the factory. I wonder if Tom's still has its on it?
Wow, they do fit over there - I'll have to have a closer look in the morning. :)Quote:
Originally Posted by Sitec
I wonder if that is the one down Lang Lang way.... Has a busted exhaust manifold keeping it off the road at the moment...
James is further east than Lang Lang I thought.
Poss a guy called James Elphick..? He has an air tank in the same place as Ron's and yours... but scored an Ambo compressor from somewhere.
Gav - as Ron has indicated I would try and source some 24v brackets and idler. Below is the only pic I have of my engine so you can just see where the 24v alternator sits. I can take more pics tomorrow if you want.
Also I have a 12v alternator on my engine that sits at the bottom of the engine on the passenger side - there are holes in the block etc to mount stuff in this position - surprisingly despite water crossings and mud I have never had a problem with dirt getting into this alternator. Again I can take some pics if you want.
Cheers
Garry