Here's a shot of my 101 that I love!! Thanks to Redback (Baz) for taking this shot!! Loving owning another 101, and even tho it was hard to part with the 130, it was worth it!!!![]()
Here's a shot of my 101 that I love!! Thanks to Redback (Baz) for taking this shot!! Loving owning another 101, and even tho it was hard to part with the 130, it was worth it!!!![]()
1995 Mercedes 1222A 4x4
1969 (Now know! Thanks Diana!!) Ser 2 Tdi SWB
1991 VW Citi Golf Cti (soon to be Tdi)
'When there's smoke, there's plenty of poke!!'
'The more the smoke, the more the poke!!'
Almost Terminatorish.
![]()
1995 Mercedes 1222A 4x4
1969 (Now know! Thanks Diana!!) Ser 2 Tdi SWB
1991 VW Citi Golf Cti (soon to be Tdi)
'When there's smoke, there's plenty of poke!!'
'The more the smoke, the more the poke!!'
well I'd better pull my finger out then!
now where did I put that job list then.........
So, having covered over 5000kms now in the 101, there are a few things that need addressing. The lights, steering and ride.. I've been trying to decide wether I remove my third leaf from the front and see how it goes... Snap decision was made as I drove home from work to remove them. So an hour on the tools and the two leaves I fitted for the diesel have been replaced with two 16mm plates (to retain my sump to diff clearance). Well, that's the first niggle dealt with.. Ride height has dropped a little, but not as much as I thought.. The 101 now sits perfectly level.. I think the weight of the two rear spares and camp boxes has lifted some weight off the nose. As for on road handling.. Much better. Nice and smooth, but still stiff enough to feel what's going on. Its also eliminated a slight vibration I had at 90kph, and runs beautifully at 100kph. Next is the lighting and steering!!!![]()
1995 Mercedes 1222A 4x4
1969 (Now know! Thanks Diana!!) Ser 2 Tdi SWB
1991 VW Citi Golf Cti (soon to be Tdi)
'When there's smoke, there's plenty of poke!!'
'The more the smoke, the more the poke!!'
I chose the standard Narva light buckets and 7" round lights. They adapted easily to the factory mounting plates and put out very good light. These with an upgraded loom would provide a very simple/reasonable cost upgrade.
Products
Products
You can see what they look like in my build thread. They make good work lights too
I'f you're going to make a new front bar and happy to spend some money maybe look at their ADR approved LED lights - they look pretty
L.E.D Headlamp Assemblies - Products - Narva
Love those LED lights.
Hi Stuee..
Like Mick, I love those LED lights too, but the price!!! Ouch! Originally I was going to go with the Narva ones you pictured for the outer two, and some described as 'aircraft landing lights' for the center two, but they are a sealed beam, and off road vibration put me off them, so I think I've settled on 4 of these... The 'Halo' type... which I think would look cool on the front of a big white imposing 101!!!. Open to opinions tho!
I also have this daft idea to set the lights up so that the outer two are the dipped beam, all four are on for main (inners switchable with 100+watt globes), leaving the inner dip globes free for some alternating flashing lights.....![]()
1995 Mercedes 1222A 4x4
1969 (Now know! Thanks Diana!!) Ser 2 Tdi SWB
1991 VW Citi Golf Cti (soon to be Tdi)
'When there's smoke, there's plenty of poke!!'
'The more the smoke, the more the poke!!'
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks