-
28th October 2015, 06:28 PM
#11
Yes had my name on that 25 vehicle spring run for 2 years.
Most likely not going to happen.
Ford Transit van rear springs come very close to fitting.
Been there done all this before.
-
29th October 2015, 10:20 AM
#12
-
8th November 2015, 07:57 PM
#13
If you want new springs phone Ray at dobbinsons suspension.(07) 4927 7444 . I used to deal a lot with them and thay should be able to make exactly what you need.
I used to get truck springs made there a fair bit and prob fitted well over 100 lift kits of theirs to various vehicles and service is second to none.
-
10th November 2015, 03:51 PM
#14
No one in Australia wants to touch parabolics , nor do they have the equipment to make them.
Yes there are people who could make normal leaf springs in Aust.
-
15th November 2015, 10:46 PM
#15
The problem with multi leaf springs on a 101 is that to make a set that fitted without a lift they'd need to be no more than 4 leaves and even then they'd end up pretty flat owning to the spring over axle setup.
Perhaps doable, but when I last made enquiries with a company over here they didn't bother getting back to me.
The Santana S2000 -which was very loosely based on the 101- had multi leaf springs under the axle, but everything else was majorly different to suit them.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks