Rhino Rack have alum racks and brackets to suit Defender.
Hey Guys,
I am in the market for a roof rack for the PUMA.
ARB is the obvious choice, but reasonable expensive at $1200.00 and the alloy version is not available for a Defender.
The problem that I am encountering with cheaper versions is the mounting brackets are too short to meet the distance from the gutter to the roof line (190mm) and of course no makes one specifically to suit the Defender, other than ARB.
I would very much appreciate input and ideas on any different brands that are being used by forum members, what works ?, what doesn’t, does some one want to sell one ?
Thanks for your help.
 Master
					
					
						Master
					
					
                                        
					
					
						Rhino Rack have alum racks and brackets to suit Defender.
Wind cheetah Alloy WindCheetah - Dolium Pty Ltd
Hannibal Hannibal Safari Australia my choice and a few fender drivers on here have one plus lots of Accessories.
Aaron & Jacinta
1994 300Tdi Defender
I have the Hannibal and am very happy with it. Very robust. The slats run north south, not east west which is supposed to make it quieter. Probably does, but noise is not an issue with a Defender.
There are a lot of extras which can be added.
They are expensive, but in my opinion well worth it. The rear ladder is included.
Kenley
Just checked out the Hannibal, they do look the goods.
Are you using the full length 2200mm ?
Do you know the approximate cost ?
I have 3 Rhino bars and a Rhino rack mounted on top. Similar price to ARB, but very robust and has proven itself in some rugged country.
Numpty
Thomas - 1955 Series 1 107" Truck Cab
Leon - 1957 Series 1 88" Soft Top
Lewis - 1963 Series 11A ex Mil Gunbuggy
Teddy5 - 2001 Ex Telstra Big Cab Td5
Betsy - 1963 Series 11A ex Mil GS
REMLR No 143
Hannibal is what I have and would recommend. Give Pete at Hannibal a call and he can fill you in on any details you need.
MY15 Discovery 4 SE SDV6
Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
The
aforementioned racks all seem pretty good. I think TJM made an alloy rack to suit the Defender too.
I designed a low line, light weight rack (weighs only 23kg).
The photos for it are on the following link :
roofrack pictures by konstantinoufamily - Photobucket
These photos should appear on the aulro discussion below, but photobucket must have rearranged their URLs or something, because I haven't moved the images, but they fail to link. Anyway, the following link will give you some more info, in case you want to consider getting a rack made up.
http://www.aulro.com/afvb/projects-t...roof-rack.html
opposite lock do a rack thats from south africa that is similar to the hannibal......a little cheaper apparantly
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks