Results 1 to 5 of 5

Thread: Entering radio code in 2008 puma radio?

  1. #1
    Join Date
    Mar 2008
    Location
    Київ
    Posts
    3,042
    Total Downloaded
    0

    Entering radio code in 2008 puma radio?

    Hi I have a 2008 puma 110 csw, the dealers replaced the clutch and somehow stuffed the radio code
    When I press the power button it gives a message after about 2 seconds of: 3cde err then goes to safe
    I found two radio codes in the stuff I got so someone must have replace the radio and not put it in the dealers network system!!
    How do I re enter the code? any help appreciated

  2. #2
    solmanic's Avatar
    solmanic is offline One Merc post away from being banned...
    Join Date
    Jan 1970
    Location
    Maleny, Queensland
    Posts
    2,912
    Total Downloaded
    0
    Pull the radio out of the car and hit it three times, very hard with a large hammer. Turn the unit over and repeat.....





    Then go and buy a decent radio to replace it.

  3. #3
    Join Date
    Jul 2003
    Location
    Sydney's gritty inner west (2204) and verdant Mount Wilson
    Posts
    7,445
    Total Downloaded
    0
    From the Owners Handbook

    Audio system security



    SECURITY CODE


    The security code is entered into the head unit
    during manufacture; it is not necessary to enter
    the code during normal vehicle usage.
    However, in the event of a battery reset, e.g.
    subsequent to a flat battery or head unit
    change, the head unit will prompt for a security

    code by displaying
    CDE 0000. Following an
    interruption in power supply (battery
    disconnect for example) ifCDE 0000 is not displayed, pressing button
    5 will display the code entry screen.

    Entering a security code


    The vehicle is delivered to the user with a
    security code card; the user must enter the

    code using the numeric (radio preset) buttons

    to resume operation of the head unit. Preset
    buttons 1, 2, 3 and 4 correspond to each digit
    of the security code. For example, if the code is
    6789 the user must press the number 1 button
    six times, the number 2 button seven times, the
    number 3 button eight times and the number 4
    button nine times followed by a single press of
    the number 5 button to complete the code
    input process.
    If an incorrect code is entered

    1CDE ERR will


    be displayed and you will be asked to re-enter
    the code correctly. If the code is entered

    incorrectly three times

    3CDE ERR will be
    displayed after the third incorrect entry,
    followed by SAFE. The audio unit will be locked
    into safe mode for one hour during which time
    it will not operate. The audio unit must be left

    switched on for one hour. Once an hour has

    past with the audio unit switched on, the



    correct code can be entered.

    In the event that the head unit code card is lost
    the user should seek advice from the dealer to


    retrieve the code for their head unit. The user

    will be required to produce some form of proof
    that they are the rightful owner of the vehicle
    e.g. the log book or a purchase receipt (if
    bought second hand, for example) before the
    dealer is authorised to issue the code. This
    condition is imposed to prevent stolen head



    units being used.

    Mahn England

    DEFENDER 110 D300 SE '23 (the S M E G)

    Ex DEFENDER 110 wagon '08 (the Kelvinator)
    http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html

    Ex 300Tdi Disco:



  4. #4
    Join Date
    Mar 2008
    Location
    Київ
    Posts
    3,042
    Total Downloaded
    0
    thanks so much, all sorted out!!!






  5. #5
    Join Date
    Jun 2007
    Location
    Margaret River
    Posts
    800
    Total Downloaded
    0

    Enter radio code with 5 not RND

    Quote Originally Posted by one_iota View Post
    From the Owners Handbook



    The PDF is here:

    http://www.aulro.com/afvb/local_link...&catid=7&id=80

    HTH

    [/LEFT]
    Yesterday I disconnected my battery PUMA 2012, and needed to reenter the security code. Followed the instruction in my handbook which says to complete the entry with RND button (not 5). This didnt work so finally after a few stabs in the dark got it to accept by pressing button 5. Just like it says in the quote above.
    So dont believe everthing you read in the handbook.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!