Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Axle and CV Upgrades in a Defender

  1. #1
    Join Date
    Mar 2008
    Location
    TBA
    Posts
    2,328
    Total Downloaded
    0

    Axle and CV Upgrades in a Defender

    Well after doing a bit of a search I couldn't really find a thread dedicated solely to the topic. If there is one could someone let me know where it is

    But back to my question

    I smashed a CV the other day, I think because there was a lack of lubrication. Very little of that grease/oil stuff was still in the cavity; so I reckon I'll convert them to oil while I'm poking around in there

    What I would like to know is what should I uprgade too?

    It does go offroad but I don't cain it, and I do plan on fitting a front locker at a later date

    Here are the options that I have found so far:

    Ashcroft Transmissions
    Ashcroft Transmissions

    Looking at about $1100 without freight for CVs and halfshafts

    Rover Tracks Heavy Duty Land Rover Accessories

    Roughly $720 without freight for axles and halfshafts

    There is the option of fitting County CVs etc but I'd rather not go down that road

    So can anyone offer any advice please or add to my list of options

    Thanks

  2. #2
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Hi Jock,

    Either Ashcroft or Rovertracks parts are both excellent, and are very unlikely to let you down. I run the Rovertracks axle and CV kit, but would run Ashcroft stuff happilly.

    I personally dont see the point in running 'county' CV's.

    Rgds
    Pete

  3. #3
    Join Date
    Jan 2010
    Location
    Victoria
    Posts
    84
    Total Downloaded
    0
    G,day

    You could also have a look at the KAM fused CV kit. I am fitting mine this week along with KAM F & R lockers, KAM aerospace front axles and HT rear axles and drive flanges. (to Range Rover)

    I was going to go with ashcroft CVs but liked that the KAM stuff has the fused half shaft (its easy and cheap to replace a half shaft rather than a CV or front axle) and they have a 5 year warranty against breakage running 35"s.

    Can posts some pic of mine before I fit them if you like.

    Cheers Gavin

  4. #4
    Join Date
    Dec 2007
    Location
    South East Tasmania
    Posts
    10,705
    Total Downloaded
    0
    I would go for Keith gear they are excellent products and very good service.

  5. #5
    Join Date
    May 2007
    Location
    Newcastle
    Posts
    878
    Total Downloaded
    0
    there are a lot of options and all depending on who you talk to - you will be told at some point that they are all the best. speaking from experience if your not going to be doing anything too hardcore just go for the cheaper option between ashcroft, rovertracks and hytuff. if you are intending to do some hardcore stuff IMHO i'd stay away from the latter of the three.
    i've not run rovertracks so can't offer an opinion on them but even though the ashcrofts are the most exy i can totally recomend them and they come with a 5yr guarentee (or at least they used to, but your better off double checking) on anything upto and including 35" tyres without having a fusible stub to break

  6. #6
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Hi-Tough, I believe don't produce a CV option.

    I personally cannot see the point of a fuseable stub.... If I am attempting to make some dodgy climb, I want every last bit of mechanical strength to try and ensure I make it up!

    The thought of a fuseable stub breaking and saving the CV itself is not a good one in my mind.....

    As Taff says Both Ashcroft and RT offer excellent warranties. RT's I believe isn't tyre size limited although you would need to clarify that.

  7. #7
    Join Date
    Mar 2008
    Location
    TBA
    Posts
    2,328
    Total Downloaded
    0
    Thanks for all the info fellas

    I'd be interested to here cal415s opinion (but his PM box is full atm) I think he previously fitted the Rovertracks option and he runs 37s

    By the sounds of it all I may head the Rovertracks way, they are $400 cheaper and seem to be just as good

    I only plan on running a 33in tyre

    Also howmany of you have converted your CVs and bearings to run in your diff oil?

    Thanks

  8. #8
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,127
    Total Downloaded
    99.87 MB
    I thought Hytuff didn't do CV's, so they may not be an option unless you're not breaking CV's or you want to convert to County CV's.

    I'd only look at Ashcroft or Rovertracks, both of which I understand are made by the same company that produces the Longfields.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  9. #9
    Join Date
    Dec 2007
    Location
    South East Tasmania
    Posts
    10,705
    Total Downloaded
    0
    Quote Originally Posted by Jock The Rock View Post

    Also howmany of you have converted your CVs and bearings to run in your diff oil?

    Thanks
    Justin converted my Defe

  10. #10
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Hey Simon,

    I believe now that Rovertracks use a different manufacturer.

    Jock,

    Grimace in our club runs 37" Stickies now on the RT setup and has run 37" tyres on them for years, without any trouble

    Keith recommended that I ran oil in my swivels instead of grease when fitting them so I now do. (I still have the seal between the two however)

    Rgds
    Pete

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!