Puma 110 Home Made Drawer System!

Quote:

---

Originally Posted by Cracka

Andy,

Nice job on the drawer mate. I see you used 15mm ply, I'm assuming you used that for the top as well. Do you get any flex from the top deck at the open end when you load it up or kneel on it getting gear in or out.

I'm trying to determine what might be the best thickness for an 'open' type setup with 4 wolf boxes under it. I will have a central support between the wheel boxes running front to back, but with 12mm I still get flex, hence why I'm asking about 15mm.

Thanks

Mick

---

Hello Mick

I used 18mm ply from memory and it still flexes a little with no support in the middle. I have photos in the members rides of the 4 wolfpack boxes underneath.

Sent from my GT-I9505 using AULRO mobile app

Quote:

---

Originally Posted by GlennWA

Hello Mick

I used 18mm ply from memory and it still flexes a little with no support in the middle. I have photos in the members rides of the 4 wolfpack boxes underneath.

Sent from my GT-I9505 using AULRO mobile app

---

Thanks Glenn, I did the job and posted the results here http://www.aulro.com/afvb/90-110-130...rage-done.html

Thanks for the thought

Mick

Good job Samblers, I had missed this for some reason.....

Mick