Results 1 to 7 of 7

Thread: Which bits of a Puma wagon are steel.

  1. #1
    Join Date
    Jan 2010
    Location
    Cairns, Queensland
    Posts
    38
    Total Downloaded
    0

    Which bits of a Puma wagon are steel.

    - Apart from the obvious bits like the chassis/cross-members etc?

    - I gather from the 'rust' drips on the floor story the firewall is steel - so is there any easy and practical way I can get a look at the inside of my firewall at home in the shed so I can hit it with some fishoil spray or something? Dont like the sounds of this behind the scenes rust business. Which panels/frame bits of the Puma are actually steel? I suppose I could check it with a little magnet but rather you experienced Defender types listed the items/components for me to check! 11/2007 Defender.

  2. #2
    dmdigital's Avatar
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Door skins are also steel.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]

  3. #3
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    All defenders have a steel chassis, firewall and door frames. They also have steel cappings (halfway up the body and at the rear corners) which were galvanised until ~1988 but have only been painted since.

    From 2004(ish) on they also got a steel rear door skin.

    I am pretty sure the bonnet is steel?

    As for rustproofing the firewall, the main problem areas are the footwells and the pillars (including the windscreen mounts). The footwells are only single skinned, so easy to rustproof. The pillars can be rustproofed from the engine bay, from the drain holes at the bottom, or by removing the door hinge bolts.

  4. #4
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    yes the bonnet is steel

  5. #5
    JDNSW's Avatar
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,511
    Total Downloaded
    0
    Also steel on my County, and I assume up to current models, is the seat box and the door sills and B-pillar, plus a number of brackets and mounts under the body, including the reinforcing for the under rear body floor.

    Historically, the first (preproduction) Landrovers in 1948 had a steel chassis (including bumper) , and an aluminium body except for capping, door frames, windscreen frame and firewall, but with almost all steel galvanised. About the change to 88" wheelbase, the radiator support changed from alloy to painted steel. By the time production started the chassis and firewall were no longer galvanised, and since then the amount of steel has increased and the amount of galvanising decreased. With the Series 2, door frames were no longer galvanised, for example, and Series 3 no longer had galvanised bonnet hinges. The 90/110 was pretty much the same as the Series 2/2a/3, except that the galvanised windscreen frame was replaced by an alloy one, and the seat box had become steel, and fewer of the bits of steel underpinning the body were galvanised. With the introduction of the pushbutton door handles, the body capping was painted, and after a few years, no longer galvanised. In 2002 or thereabouts, the rear door became steel skinned, and in 2007, so did all doors plus the bonnet.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  6. #6
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,704
    Total Downloaded
    1.63 MB
    Get a fridge magnet and run it around the car.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  7. #7
    Didge Guest
    Isn't everything steel except the door skins and guards?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!