- 
	
		
                        
                                
                                        
                                                20th March 2011, 08:49 PM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			300 Tdi valve sealing (or not)?
		
 
			
				
					Ladies and Gents,
 Engine running, oil filler cap off, hand over filler hole and I can feel pressure building up. Is this normal? I'd guess not and go one further and guess that the valve stem seals are not doing their job. But I could be wrong; it's been known to happen before! 
 
 Ta,
 
 Marky
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                21st March 2011, 06:47 AM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Valve stem seals aren't fitted to keep pressure in. They keep oil from pouring down the valves. I would look for clogged breathers first.
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                21st March 2011, 06:54 AM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					More likely it is blow by. Some is normal.
 This is just air escaping past the piston rings as the little explosion happens on the other side of them.
 Yes i agree you could well have some blocked breathers.
 Clear them as soon as you can and you might notice that the engine doesnt loose so much oil on the ground.
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                21st March 2011, 07:30 AM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					I think the brake vac pump blows into the crankcase? try checking the breather cyclone and hoses.
 Terry
 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks